Skip to content
Research Article Open access CC BY 3.0

Optimisation of Plantain - Brewers’ Spent Grain Biscuit Using Response Surface Methodology

O. S. Omoba, O. O. Awolu, A. I. Olagunju, A. O. Akomolafe

Journal of Scientific Research and Reports · pp. 665–681 · Published 27 Aug 2013

10.9734/JSRR/2013/4944

Abstract

Aim: To optimize the formulation of plantain – brewers’ spent grain biscuits using Response Surface Methodology with the purpose of achieving the maximum quality and overall acceptability of produced biscuits. Study Design: Central composite design model of Response surface methodology was employed to design the work. This produced thirteen experimental runs, the variables considered were Brewer’s spent grain (94-97 %) and plantain flour (3-6 %) while the responses were percentage soluble dietary fibre, percentage insoluble dietary fibre and iron contents. Place and Duration of Study: Department of Food science and Technology, Federal University of Technology, Akure, Nigeria, between January to December 2012. Methodology: The variables considered for the research were Brewer’s spent grain (94-97 %) and plantain flour (3-6 %) while the responses were percentage soluble dietary fibre, percentage insoluble dietary fibre and iron contents. Thirteen (13) runs were obtained.The optimization was carried out on plantain flour and brewer’s spent grain in order to know which of the combinations will give best total dietary fibre and iron content. Results: Optimized values, which are the highest total dietary fibre and iron values of 68.55 % and 0.80 mg /100g respectively, were obtained from blends of 95.5 % and 4. 5 % of plantain flours and Brewer’s spent grains respectively (PS 4). The best response surface model for the insoluble dietary fibre was quadratic that of soluble dietary fibre was linear while it was quadratic also for iron content. The lack of fit, (p=0.4208) is non significant. A non significant lack of fit is required confirming that, the model of is adequate. The R2 value of 52 % signifies a good model. This is in view of the fact that R2 must be at least 50 % to be a good model. Conclusion: Response Surface Methodology was effective in optimizing iron and dietary fibre in the formulation of plantain-spent grain biscuit. The nutritional composition of the plantain-spent grain biscuit indicated good levels of dietary fibre (IDF, SDF and TDF), Iron.

Response surface methodology plantain flour brewers spent grain total dietary fiber iron content

Cited by 29

Brewers’ spent grain as a functional ingredient in bakery, pasta, and cereal-based products

Hamed Saberian, Amir Pouya Ghandehari Yazdi, Mohammad Nejatian · Future Foods · 2024

Preparation of Healthy Cookies from Germinated Flour Blends of Finger Millet and Pearl Millet Sweetened with Jaggery

Garg Amar P, Sharma Shikha · Journal of Advanced Pediatrics and Child Health · 2024

Proximate, Amino Acid Compositions and Functional Properties of Maize-Beans Composite Flours

T. Aderinola, Dorcas Adeoye · Food Science and Engineering · 2022

Chemical composition, in vitro antioxidant properties, and phenolic profile of shallot (Allium ascalonicum L.)-enriched plantain biscuit

Aanuoluwapo Elizabeth Adeyemo, O. Omoba, Aderonke I. Olagunju · Bulletin of the National Research Centre · 2022

Quality evaluation and storage properties of traditional maize-based snacks: Ipekere Agbado enriched with Bambara groundnut

M. Oluwamukomi, T. Oluwajuyitan, Oluwatobiloba Tolulope Makinde · Bulletin of the National Research Centre · 2021

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

29

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.