Effect of Microbial Inoculant on Physicochemical and Microbiological Properties of Cassava Fermentation Process and Fufu Produced
Evelyn A. Agbor, Pamela B. Tiku, M. Desire Hermann
Asian Food Science Journal · pp. 1–9 · Published 14 Mar 2022
10.9734/afsj/2022/v21i330411Abstract
Aim: The effects of adding a microbiological inoculant on the physicochemical and microbiological properties during the fermentation process of cassava (Manihot esculenta Crantz) and on the sensory characteristics of the fufu produced using a local Bambili cassava variety were examined. Study Design: Completely Randomized Design was applied for this study. Place and Duration of Study: Study was carried out at the Food Technology and Post-Harvest Programme Laboratory (FTPHL) of the Institute of Agricultural Research for Development (IRAD) Bambui, North West Region of Cameroon, between January and April 2020. Methodology: Cassava was soaked in water and three treatments: 0%, 1% and 4% Light Matrix Organics (LMO) added to the water. The fixed submerged fermentation was used. Water samples were randomly collected daily and analysed for pH, temperature, Titratable Acidity (TA) and microbial counts. The experiment was carried out in triplicates, varying temperature each time (35oC in trial 1, 32oC in trial 2 and 21oC in trial 3). Sensory evaluation was carried out on the fufu produced. Results: Temperature, pH, TA and microbial counts followed the same trend in all 3 treatments. TA increased from 0.01-0.15%, while pH decreased from 6.9-4.85. Temperature increased then dropped at the end of the experiment. Total bacterial counts increased from log10 (3.49) to log10 (6.9) CFUml-1. Yeasts and moulds increased from log10 (7.15) CFUml-1 and then dropped to log10 (5.48) CFUml-1 at the end of the experiment. Coliforms decreased from log10 (4.66) CFUml-1 to log10 (3.30) CFUml-1. The above parameters did not vary significantly (p<0.05) within treatments. Also, soaking temperature affected the duration of fermentation, hence the finished product. The natural fermentation process was preferred for colour, taste and flavour while the 1% LMO sample was preferred for texture. Conclusion: Under good hygienic conditions; water fufu produced by natural fermentation will be of good quality for consumption.
Cited by 3
A. David, Hafizuddin Wan Yussof, B. Aderemi · Journal of Chemical Engineering Research Progress · 2026
D. Abutu, B. Aderemi, A. Ameh · SPE Nigeria Annual International Conference and Exhibition · 2025
Lethiwe Lynett Mbuyane · Food Safety and Health · 2025
Related research
- Physicochemical and Microbiological Parameters of Water from Rivers in Keffi, Central Nigeria — shares topic coverage
- Bacteriological and Physico-chemical Analysis of Borehole Water in Auta Balefi Community, Nasarawa State, Nigeria — shares topic coverage
- Impact of Burning E-waste on Soil Physicochemical Properties and Soil Microorganisms — shares topic coverage
- Recreational Water Quality Assessment of Some Selected Swimming Pools in the Asuogyaman District, Ghana — shares topic coverage
- A Study of Bacteriological and Physicochemical Characteristics in Soils of Auto-mechanic and none Auto-mechanic Workshop Soils from Selected Areas in Calabar Metropolis — shares topic coverage
Article metrics
Real usage data collected on this platform.
0
Page views
0
PDF downloads
0
Outbound clicks
3
Citations
Views by country
Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".
No views recorded yet.
Traffic sources
Referring site, by host.
No traffic recorded yet.
Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.