Effect of Aerating Duration on Hydrocarbon Biodegradation in a Simulated Crude-Oil Polluted Aquatic Environment Undergoing Bioremediation

Abstract

The aim of this research work was to determine the aerating duration that would be effective in enhancing hydrocarbon biodegradation rate during bioremediation of crude-oil polluted river. Sediment and river-water were placed in four glass troughs labeled CT (control), A, B, and C. The setups were polluted with crude-oil, and allowed undisturbed for 2 weeks. Subsequently, accessible crude-oil on the surface was removed; bacteria and nutrients were then added. Air was bubbled for 3 hours into setups A, B, and C, at daily, 3 days, and 7 days interval respectively. Aeration was not applied to setup CT. On day 1, 7, 14, and 21, hydrocarbon concentration was determined; populations of total heterotrophic bacteria (THB) and hydrocarbon-utilizing bacteria (HUB) were also determined. The time it will take for hydrocarbons in the setups to biodegraded “completely” was calculated using first-order reaction equation. The results obtained showed that 71.43, 86.39, 83.17, and 15.42 % hydrocarbon degradation were obtained in setup A, B, C, and CT respectively. The time it will take for hydrocarbons in the setups to biodegrade “completely” were 129, 89, 101, and 1079 days for A, B, C, and CT respectively. There was slight reduction in population of HUB in setup CT, fairly stable population in setup A, and increase in population of HUB in setups B and C. It is concluded that aerating crude-oil polluted aquatic environment for 3 hours at 3 days interval will be more effective in enhancing hydrocarbon biodegradation rate during bioremediation.