Skip to content
Research Article Open access CC BY 4.0

Design and Production of Palm Nut and Fibre Separating Machine

Okolie, Paul Chukwulozie, Oluwadare, Benjamin Segun, Ezenwa, Obiora Nnaemeka, Azaka, Onyemazuwa Andrew

Advances in Research · pp. 1–8 · Published 10 Nov 2018

10.9734/AIR/2018/44549

Abstract

Palm nut and fibre separating machine have been designed, constructed and tested. The essential components of the machine are the feeding chute, separating unit, pulverizing unit, discharge outlets for nut and fibre, and the prime mover. The power required for operation of the machine is 2.86 KW. The machine was tested with both dry and wet samples of the nut and fibre mixtures for three different runs and the average gotten and tabulated. The investigation results revealed that the machine gave its optimum work performed using the dry mixture at the throughput capacity, separating efficiency and quality performance efficiency of 0.155 kg/sec, 89.7 % and 82.3 % respectively. However, the throughput capacity, separating efficiency and quality performance efficiency with the wet mixture gave 0.144 kg/sec, 79.3 % and 80.1 % respectively.  

Separator machine palm nut motor auger equipment

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.