Skip to content
Research Article Open access CC BY 4.0

Optical Characterization of Nickel Sulphide Thin Films Prepared by Chemical Bath Deposition Method

J. N. Nwauzor, E. O. Nnachi, I. S. Okoroudoh, M. E. Igbo, A. D. Babalola

Journal of Energy Research and Reviews · pp. 33–38 · Published 11 May 2023

10.9734/jenrr/2023/v14i1276

Abstract

Nickel sulfide thin films were prepared using chemical bath deposition method on a glass substrate. Nickel sulphate and sodium thiosulphate were used as starting chemicals. Ethylenediaminetetra-acetic acid (EDTA), was used as the complexing agent. In this study time was the only parameter optimized to get good quality thin film. Films were characterized using an UV M501 single beam scanning spectrophotometer from a wavelength of 220- 560nm. The nickel sulfide thin films exhibited direct band gap transition with band gap energy 2.3eV. A poor reflectance, moderate absorbance and high transmittance was recorded.

Nickel sulfide [NiS] thin film chemical bath deposition Band gap complexing agent

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.