Skip to content
Research Article Open access CC BY 4.0

An Elastic-plastic Finite Element Analysis of Two Interfering Hemispheres Sliding in Frictionless Contact

Itzhak Green

Physical Science International Journal · pp. 1–34 · Published 19 Jul 2018

10.9734/PSIJ/2018/42783

Abstract

A vast amount of previous work on hemispherical contact is almost solely dedicated to quasi-static normal loading (axisymmetric 2D models). Some scarce work exists on tangential loading but it is limited to full stick conditions. The sliding of interfering bodies is considerably distinct. Hence, the objective of this work is to investigate two hemispheres sliding across each other, subject to an interference that is large enough to deform their surfaces permanently, during and after contact. Similar (steel-on-steel) and dissimilar (aluminum-on-copper) materials are investigated using a 3D finite element analysis (FEA). The behavior and outcomes are vastly different from previously reported work. Results include the formation and propagation of the von Mises stresses, the deformations, the contact areas, and the energy loss even with friction being absent.  The results are normalized so that they may be applied to any scale (from macro to micro contacts); the main intention, however, is to apply the results to interfering asperities in rough surfaces that are sliding. The effectiveness of that normalization is discussed. Empirical equations for the net energy loss, the permanent residual deformations (damage), and the effective coefficient of friction (in frictionless sliding) are given as functions of the interference. Lastly, some FEA results are favorably compared to those obtained from a semi-analytical method, but these are only limited to a few special cases that the latter is able to solve.

Tribology contact mechanics interference sliding large deflections plasticity post sliding residual stresses and deformations effective friction energy loss.

Cited by 10

A Novel Strain Rate-Dependent Sliding Friction Coefficient Model

Zhiqiang Xu, K. You, Zhanjiang Wang · Tribology International · 2025

Finite element study of displacement controlled fretting in cylinder contact with different axis crossing angles

Tie-Neng Guo, Ruguo Ji, Yun-Fei Ma · Advances in Mechanical Engineering · 2022

Application of Three-Dimensional Simulation Tools in the Analysis of Shoe-floor Traction Properties: A Review

O. H. Omar, In-Ju Kim · 2022 Advances in Science and Engineering Technology International Conferences (ASET) · 2022

A Novel Strain Rate-Dependent Sliding Friction Coefficient Model

Zhiqiang Xu, Ke You, Zhanjiang Wang · 2025

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

10

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.