Cementation of Cd Ions on Zinc Using a Rotating Fixed Bed Impeller Basket Reactor

Abstract

Cementation or metal displacement reaction is one of the most effective techniques for removing toxic metals from industrial waste solutions. Aims: The main purpose of this work is to study the rate of cementation of cadmium by using a rotating bed of Zn Raschig rings packed in a perforated impeller basket for the investigation of the removal of Cd 2+ from waste solution. Study Design: The reactor was tested for Cd2+ concentration removed, the diameter of Zinc Raschig rings, and the rotational speed of the basket. Methodology: The results indicate that there are two rates of cementation for Cd-Zn system, a high rate at the beginning, followed by a lower rate after the initial period. The results also show that percentage removal of Cd2+ ions from solution increases by increasing the speed of basket rotation, and as the diameter of Zn Raschig ring packed in the basket reactor, increases the removal of Cd2+ decreases. The cadmium deposits on zinc as powder. Results: The removal of Cd2+ is optimum for ring diameter of 0.5 cm, initial concentration of 100 ppm, and basket rotation speed of 500 rpm. The experimental data fit the following equation: Sh=0.041 Sc0.33Re0.40. This equation can be used for the design scale-up and operation of reactors used to remove Cd2+ from wastewater by cementation. Conclusion: Rates of cementation were expressed in terms of the rate of mass transfer, the mass transfer coefficient increases as the rotational speed of the basket increases.