Skip to content
Research Article Open access CC BY 4.0

Technology Obtaining Composites for Processing of Metals on the Base of Local Raw Materials

A. B. Abdulhaev, G. A. Doliev, J. F. Umaraliev, O. G. Abdullaev, S. B. Mamajonov, Bokhodir E. Sultonov

Current Journal of Applied Science and Technology · pp. 48–53 · Published 14 Oct 2021

10.9734/cjast/2021/v40i2731526

Abstract

Obtaining cheap and high-quality dry lubricant compositions based on local raw materials for stretching wires in the technology of obtaining small-sized wires from large-diameter wires. Dry lubricant obtained on the basis of local cheese is used for processing and drawing metals prepared from the following components: sodium soap, natriy sulphate Na2SO4 - 5.0-20.0; bura Na2B4O7·10H2O - 0.1-5.0 and talc. At present, the pilot-test work was carried out at a private company "DAVR METALL" in Namangan.

Sodium sulfate sodium tripolyphosphate sodium carbonate modification stearic acid calcium stearate magnesium

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.