Skip to content
Research Article Open access CC BY 4.0

Engineering Properties of Awgu Shale in Enugu State, Nigeria

Tombari Bodo

Asian Journal of Geological Research · pp. 177–184 · Published 29 Jan 2019

Abstract

The samples of Awgu shale collected from Nnewi and Mgbowo in Awgu Local Government Area of Enugu state were analysed in the laboratory for such properties as linear shrinkage, moisture content and atterberg limits (plastic limit and liquid limit). The samples recorded moisture content ranging from 7.96%-54.16%, linear shrinkage ranging from 8.57-11.4%, plastic limit ranging from 26%-46%, liquid limit from 48%-88% and plasticity index ranging from 21%-54%. The results of the analysis showed that the samples had high moisture content (except for borehole 4 and 5 that showed low moisture content), moderate to high linear shrinkage and moderate to high plasticity. On the basis of the above results, it is inferred that Awgu shale cannot be used as engineering materials either for foundation support or road construction without reasonable reinforcement.

Engineering properties soil shale shear strength plasticity.

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.