Skip to content
Research Article Open access CC BY 4.0

Response Surface Optimization of Corn Husk Fiber Mercerization Using NaOH

Julius Mmelikam Chukwuemeka, Joseph Tagbo Nwabanne, Victor Ifeanyi Ugonabo

Journal of Engineering Research and Reports · pp. 62–82 · Published 11 Mar 2021

10.9734/jerr/2021/v20i317284

Abstract

The optimum mercerization parameters for treatment of corn husk using NaOH were analyzed by response surface methodology (RSM). The surface morphology and chemical structures of the raw and NaOH-treated fibers were studied using scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR) to validate the RSM results. The optimum chemical characteristics of corn husk treated with NaOH obtained when 100g of corn husk biomass was mercerized in 2.5Mol/dm3 NaOH for 8 days were: cellulose -70.51%, hemicellulose -8.99%, lignin -6.54, weight loss – 92.27%, ash content -10.11% and extractive -3.78%. The model summary statistics showed that quadratic model best fitted the optimization analysis. The ANOVA results showed that weight loss, hemicellulose, cellulose and lignin contents of corn husk biomass were affected by retting time, retting concentration and weight of biomass. Cellulose content of corn husk was observed to increase with increment in retting time and retting concentration while the reverse is the case for hemicellulose and lignin contents. The NaOH-treated corn husk has higher cellulose content than the untreated corn husk biomass while the reverse is the case for hemicellulose and lignin. SEM images showed that untreated corn husk biomass has irregular cross-section, non-uniform surface and some impurities while NaOH treated is finely packed together. XRD graphs showed that cellulose is the predominant content of the fiber. The FTIR results also indicated a variation of the peaks of the curves after treatment which favors an increase in the cellulose content.

Corn husk fiber sodium hydroxide optimization mercerization characterization.

References (13)

  1. 1 Hydrophobic treatment of natural fibers and their composites—A review [DOI]
  2. 2 Characterization of new natural cellulosic fiber from Cissus quadrangularis root [DOI]
  3. 3 Substitution potentials of recycled HDPE and wood particles from post-consumer packaging waste in Wood–Plastic Composites [DOI]
  4. 4 The effect of alkali treatment under various conditions on physical properties of kenaf fiber [DOI]
  5. 5 Optimization of tensile behavior of banana pseudo-stem (Musa acuminate) fiber reinforced epoxy composites using response surface methodology [DOI]
  6. 6 Characterization of New Natural Cellulosic Fibers – A Comprehensive Review [DOI]
  7. 7 Study on the Performance of Hybrid Jute/Betel Nut Fiber Reinforced Polypropylene Composites [DOI]
  8. 8 Mechanical and acoustical properties of particleboards made with date palm branches and vermiculite [DOI]
  9. 9 Use of Almond Shells and Rice Husk as Fillers of Poly(Methyl Methacrylate) (PMMA) Composites [DOI]
  10. 10 Thermal properties of corn husk fiber as insulation for flat plate solar collector [DOI]
  11. 11 Extraction Of Cornhusk Fibres For Textile Usages [DOI]
  12. 12 Investigating the Physical Properties of Treated and Untreated Jute Fibre-Polyester Composites [DOI]
  13. 13 Surface modification of eco-friendly particleboard made from sorghum bagasse and citric acid sucrose adhesive [DOI]

Cited by 4

Characterization of maize stalk cellulose fibers surface morphology and cross- section for geopolymer composite development

Addisu Workiye, Eyassu Woldesenbet, Lulseged Belay Addis · Journal of Materials Research and Technology · 2025

Showing 1 of 4 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

60

Page views

0

PDF downloads

41

Outbound clicks

4

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.