Skip to content
Research Article Open access CC BY 4.0

Preparation and Characterization of Poly(L-lactic acid)/Chitosan/Microcrystalline Cellulose Blends

Md. Sagor Hosen, Md. Hafezur Rahaman, M. A. Gafur, Rasel Habib, M. R. Qadir

Chemical Science International Journal · pp. 1–10 · Published 14 Feb 2018

10.9734/CSJI/2017/39534

Abstract

To prepare biodegradable and biocompatible polymer composites with better thermal and mechanical properties, five different Poly(L-lactic acid)(PLLA)/Chitosan/ Microcrystalline Cellulose (MCC) blends, with a different ratio, were prepared and characterized. MCC was extracted from jute fiber by conventional acid hydrolysis method with 64 wt% H2SO4 and chitosan was extracted from shrimp shell by successively carrying out demineralization, decolorization, deproteinization and deacetylation steps. PLLA was blended with a constant percentage (20 percent) of chitosan and a calculated amount of MCC by solution casting method using a suitable solvent for each. Prepared samples were characterized by Fourier-Transform Infrared Spectroscopy (FTIR) for the identification of their compatibility in blends, Wide-Angle X-ray Diffraction (WAXD) for crystalline species and crystallinity analysis, Thermo-Gravimetric Analysis (TGA) and Differential Thermal Analysis (DTA) for thermal properties measurement. Results from FTIR analysis showed that except hydrogen bonding, there are no new characteristic absorption peaks observed in the spectrum of blends and confirm that PLLA, Chitosan, and MCC have better compatibility in blends via intermolecular hydrogen bonding. WAXD profiles data show the variation in crystallinity of different blends. TGA and DTG results indicate that MCC can improve the heat resistivity of the PLLA/Chitosan/MCC blends by the addition up to 5%.

Poly(L-lactic acid) chitosan microcrystalline cellulose blends microcrystal deacetylation acid hydrolysis thermal resistivity

Cited by 10

Preparation and analysis of poly(l‐lactic acid) composites with oligo(d‐lactic acid)‐grafted cellulose

Md. Hafezur Rahaman, Md. Masud Rana, Mohammad Abdul Gafur · Journal of Applied Polymer Science · 2019

Chitosan grafted cellulose-reinforced biodegradable polymer composite- modification, fabrication, properties and applications: A review

Md. Masud Rana, Mahfuzul Islam, Nurus Sabah Anam · International Journal of Biological Macromolecules · 2026

Biodegradable composite adsorbent of modified cellulose and chitosan to remove heavy metal ions from aqueous solution

Md. Hafezur Rahaman, Md. Ataul Islam, Md. Monjurul Islam · Current Research in Green and Sustainable Chemistry · 2021

Grafting of Cellulose and Microcrystalline Cellulose with Oligo(L-lactic acid) by Polycondensation Reaction

Md. Hafezur Rahaman, Md. Anamul Haque, Md. Aminur Rahman · Reactions · 2022

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

10

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.