Skip to content
Research Article Open access CC BY 4.0

Kinetics of Powder-Free Laboratory Examination Gloves at 345°C and 405°C by Thermogravimetric Analysis

Nasrollah Hamidi

Advances in Research · pp. 1–17 · Published 27 Sep 2015

10.9734/AIR/2016/20095

Abstract

At two consecutive temperatures, 345°C and 405°C as well the two thermal scans in between these two temperatures the kinetics of thermolysis of powder-free laboratory safety gloves (LG) was studied by thermogravimetric analysis (TGA). Three methods were used to evaluate the kinetics parameters related to the decomposition of LG at 345°C and 405°C isotherms. The results of the study indicated that the kinetics parmeters depends on the model to choose. The reaction at 354°C based on the models could be second order, fractional or many zeroth order concurrent reactions. The activation energy of thermalizes (Ea) was estimated by thermal scans, and isotherms at 308, 313, 333, 336, and 345°C. The value of Ea for the process at lower temperature was near to Ea corresponding to evaporation of volatiles, and at higher temperatures Ea was below constituent chemical bond energies as well below of Ea for decomposition of rubber in tires.

Kinetics thermogravimetric analysis powder free examination gloves examination gloves latex gloves pyrolysis of gloves neoprene and thermalizes

References (19)

  1. 1 Journal of Analytical and Applied Pyrolysis [DOI]
  2. 2 Composition of products from the pyrolysis of polyethylene and polystyrene in a closed batch reactor: Effects of temperature and residence time [DOI]
  3. 3 Fluidised bed pyrolysis of low density polyethylene to produce petrochemical feedstock [DOI]
  4. 4 A mechanistic model of fast pyrolysis of glucose-based carbohydrates to predict bio-oil composition [DOI]
  5. 5 Kinetics of the Low-Temperature Pyrolysis of Polyethene, Polypropene, and Polystyrene Modeling, Experimental Determination, and Comparison with Literature Models and Data [DOI]
  6. 6 Analysis of products derived from the fast pyrolysis of plastic waste [DOI]
  7. 7 Study on pyrolysis of typical medical waste materials by using TG-FTIR analysis [DOI]
  8. 8 Toxicity of the pyrolysis and combustion products of poly(vinyl chlorides): A literature assessment [DOI]
  9. 9 Pyrolysis of styrene, acrylate, and isoprene polymers in a vacuum [DOI]
  10. 10 Study of the Pyrolysis Kinetics of a Mixture of Polyethylene, Polypropylene, and Polystyrene [DOI]
  11. 11 Catalytic Pyrolysis of Low-Density Polyethylene over Alumina-Supported Noble Metal Catalysts [DOI]
  12. 12 Pyrolysis of latex gloves in the presence of Y-zeolite [DOI]
  13. 13 Analysis of Pyrolyzates of Polystyrene and Poly(methyl Methacrylate) by Gas Chromatography [DOI]
  14. 14 Characterization of aromatic hydrocarbon formation from pyrolysis of polyethylene-polystyrene mixtures [DOI]
  15. 15 Improved Method for the Determination of Kinetic Parameters from Non-isothermal Thermogravimetric Analysis (TGA) Data [DOI]
  16. 16 New Insights on the Kinetic Analysis of Isothermal Data: The Independence of the Activation Energy from the Assumed Kinetic Model [DOI]
  17. 17 Reaction Kinetic Model for Optimal Pyrolysis of Plastic Waste Mixtures [DOI]
  18. 18 Thermogravimetric analysis of poly(dialkylphenyl methacrylates) [DOI]
  19. 19 Chloroprene Polymers [DOI]

Cited by 0

No indexed citations yet.

Related research

Article metrics

Real usage data collected on this platform.

56

Page views

0

PDF downloads

16

Outbound clicks

0

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.