Skip to content
Research Article Open access CC BY 3.0

Design and Construction of a GSM-Controlled Pick and Place Robot

H. C. Godwin, A. R. Iwuchukwu, O. C. Okafor, C. J. Okere

Current Journal of Applied Science and Technology · pp. 4109–4123 · Published 30 Jul 2014

10.9734/BJAST/2014/10840

Abstract

The modern manufacturing environment is dynamic and uncertain. In line with the global trend in manufacturing, this project is carried out to explore into the potentials of robots in manufacturing, service industry, and domestic use. The robot was designed and constructed to incorporate the use of mobile phones as control mechanism via dual-tone-multiple frequency (DTMF). Various components such as the Gripper, Gears, Chains, and Control system were designed with good factor of safety; with factors such as vibration, inertia concerns, availability, and reliability taken into consideration. MATLAB software was used extensively in the design, simulation and testing. The Root-locus, Disturbance response, and Polar plots of the control system transfer function were plotted using MATLAB. The results obtained showed good performance characteristics; such as stability of the control system, good damping characteristics, and excellent time response to step and impulse inputs.

Design construction GSM-controlled pick and place robot

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.