Skip to content
Research Article Open access CC BY 4.0

Hybrid Panels of Wood Plies and Particles Pinus sp

Laurenn Borges de Macedo, Giovana Gobatto Balanco, Lucas José Marini, Tulio Hallak Panzera, André Luiz Christoforo, Francisco Antonio Rocco Lahr

Current Journal of Applied Science and Technology · pp. 1–9 · Published 2 Dec 2017

10.9734/CJAST/2017/36951

Abstract

The aim of this study was to develop a hybrid panel produced with wood plies and wood particles of Pinus sp. as an alternative to plywood. Tests were performed to determine mechanical properties in static bending: elasticity modulus and rupture modulus, in addition to physical testing to determine thickness swelling after 24 hours water submersion. These properties were compared with normative documents of plywood (DIN 68792) and OSB (EN 300: 2006). It was possible to conclude that panels produced in this study are in accordance with the minimum requirements of two Normative codes related to evaluated properties, which proves technical feasibility of its production.

Hybrid panel plywood OSB particles Pinus sp

Cited by 1

Evaluation of Stiffness in Compression Perpendicular to Grain of Brazilian Tropical Wood Species

A. Almeida, T. L. S. Lanini, Juliana Argente Caetano · Current Journal of Applied Science and Technology · 2018

Article metrics

Real usage data collected on this platform.

18

Page views

0

PDF downloads

1

Outbound clicks

1

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.