Fruit Waste Extract-Modified Zeolite as a Sustainable Sorbent for Cu (II) Removal from Aqueous Solutions

Abstract

Natural zeolites may exhibit certain limitations in the adsorption of metal ions from aqueous solutions due to their heterogeneous mineral composition, variable content of exchangeable extra-framework cations, and the presence of impurities. In this study, natural clinoptilolite zeolite was modified using an ethanolic extract derived from lemon peel waste to evaluate the effect of this sustainable modification approach on Cu(II) adsorption from synthetic aqueous solutions. Batch adsorption experiments were conducted using 50 mL of Cu(II) solution at 300 rpm for 60 min. A one-factor-at-a-time (OFAT) approach was applied to investigate the effects of initial solution pH (2–6), initial Cu(II) concentration (10–100 mg/L), and adsorbent dosage (500-2500 mg) for both unmodified natural zeolite (UN-zeolite) and fruit-waste-extract-modified zeolite (FWEM-zeolite). All experiments were performed in triplicate. At pH 6, complete Cu(II) removal (100%) was achieved using UN-zeolite, whereas FWEM-zeolite reached a removal efficiency of 84.37%. At initial Cu(II) concentrations of 10 and 50 mg/L, complete removal was achieved using UN-zeolite, whereas FWEM-zeolite achieved removal efficiencies of 87.97% and 80.91%, respectively. Increasing the UN-zeolite dosage resulted in complete Cu(II) removal at 2000-2500 mg, while FWEM-zeolite reached its maximum removal efficiency of 91.9% at a dosage of 1000. Overall, modification with lemon peel waste extract did not improve Cu(II) removal compared with the unmodified natural zeolite under the investigated conditions. Nevertheless, FWEM-zeolite maintained high Cu(II) removal efficiency, particularly at elevated initial concentrations, demonstrating the potential of fruit-waste-derived extracts as sustainable modifying agents for natural mineral adsorbents