Skip to content
Research Article Open access CC BY 3.0

Studies on the Suitability of Ubakala Bentonitic Clay for Oil Well Drilling Mud Formulation

T. U. Apugo-Nwosu, I. A. Mohammed-Dabo, A. S. Ahmed, G. Abubakar, A. S. Alkali, S. I. Ayilara

Current Journal of Applied Science and Technology · pp. 152–171 · Published 25 Sep 2011

10.9734/BJAST/2011/407

Abstract

The suitability of a Nigerian bentonitic (Ubakala) clay material to be used as drilling mud for oil well drilling was investigated, with Wyoming bentonite being used as a standard. Particle size distribution, Cation Exchange Capacity of the sample were determined and compared. X-ray diffraction and X-ray fluorescence of the samples were also determined. Rheological properties of the samples were determined using a rheometer (OFITE model 900 viscometer). Properties of the local clay improved appreciably when beneficiated with Carboxyl Methyl Cellulose (CMC), Poly Anionic Cellulose-Regular (PAC-R) and Sodium Carbonate (Na2CO3). The best result which came close to the properties of Wyoming clay was Ubakala mud at 24.5g /350ml of water beneficiated with 2g CMC and 1.5g Sodium Carbonate (Na2CO3). The Plastic Viscosity improved by about 1207%. This study indicates that Ubakala clay has a good potential for drilling purposes when beneficiated appropriately.  

Bentonite rheometer carboxyl methyl cellulose poly anionic cellulose sodium carbonate rheological properties

Cited by 18

Thermochemical Treatment of Nigerian Raw Clays for Oil and Gas Drilling Operations

Oghenerume Ogolo, Akeem O. Arinkoola, Peter Ngene · ChemEngineering · 2023

Comparative study of bentonite and Ikwo clay for oil-based drilling mud formulation

Peace Ugochinyerem Nlemedim, Thompson Onyejiuwa Chime, Monday Omotioma · Geoenergy Science and Engineering · 2023

DEVELOPMENT OF FILLER FROM LOKOJA BENTONITE CLAY FOR APPLICATION IN THE PRODUCTION OF PLASTER OF PARIS (POP)

Habibu Uthman, Dirisu Abraham Danjuma · FUDMA JOURNAL OF SCIENCES · 2025

Rheological study of a new water-based drilling fluid using Ubakala clay in the presence of natural polymers

M. O. Jimoh, T. O. Salawudeen, A. O. Arinkoola · Chemical Engineering Communications · 2020

Optimization and Process Modeling of Viscosity of Oil Based Drilling Muds

Azinta Cyprian Obinna, Gordian O. Mbah, Maxwell I. Onoh · Journal of Human, Earth, and Future · 2021

Comparative Study of Basic Properties of Mud Prepared with Nigerian Local Clay and Mud Prepared with Foreign Clay: A Case Study of Abbi Clay Deposit

Okologume C. Wilfred, Akinwumi E. Akinade · International Journal of Engineering and Technologies · 2016

Potential of a Blend of Low-Grade Nigerian and Commercial Grade (Wyoming) Bentonitic Clays as Constituents of Water-Based Drilling Fluids

Suleiman Shuwa, Bala Usman, Ibrahim Mohammed-Dabo · Advances in Science, Technology & Innovation · 2022

Properties and application of Nigerian bentonite clay deposits for drilling mud formulation: Recent advances and future prospects

Richard O. Afolabi, Oyinkepreye D. Orodu, Vincent E. Efeovbokhan · Applied Clay Science · 2017

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

18

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.