Skip to content
Research Article Open access CC BY 4.0

Effects of Temperature on the Pozzolanic Characteristics of Metakaolin-Concrete

Musbau A. Salau, Oseafiana J. Osemeke

Physical Science International Journal · pp. 131–143 · Published 20 Feb 2015

10.9734/PSIJ/2015/13146

Abstract

This paper focused on the thermal technique of activating pozzolanic activity of natural pozzolans, specifically calcined kaolinite clay in the form of metakaolin. The effect of heating temperatures over the range 450ºC-1050ºC in steps of 150ºC on the dehydroxylation of the kaolin and the pozzolanic activity of the resulting amorphous material were determined. The compressive strengths of metakaolin-concrete samples with 10%, 20% and 30% replacement of cement, calcined at different temperatures 450ºC, 600ºC, 750ºC, 900ºC and 1050ºC comparable to the control samples were analysed to determine the optimum temperature. Also, mixtures of mortar containing variable amounts of kaolin in the ration 5% to 30% in steps of 5% were calcined at the optimum temperature of 750ºC and investigated. The results showed the optimum heating temperature for the kaolin to be 750ºC and the proportion of metakaolin in concrete should be 10% of the cement weight. For 10% metakaolin at temperature of 750ºC, the strengths were about 109% and 107% of normal mortar cubes at 28 days and 90 days respectively, while those of concrete cubes were 99% and 97% of normal concrete cubes. Also, with replacement proportion range of 15-25% of metakaolin (MK) in concrete, a relative concrete strength of 22.23MPa and 23.15MPa for 28 and 60 days curing ages respectively can be achieved.  

Calcined kaolinite clay metakaolin thermal process pozzolanic activity blended mortar concrete

Cited by 7

Optimizing the thermal treatment of Abeokuta kaolin (south-west Nigeria) for production of natural pozzolan

Olasunkanmi A. Adekitan, Gbenga M. Ayininuola · African Journal of Science, Technology, Innovation and Development · 2017

Chemical and Microstructural Effects of Different Calcinating Temperatures on Selected Pozzolans

Catherine Mayowa Ikumapayi · Journal of Materials Science and Chemical Engineering · 2018

Workability and strengths of ternary cementitious concrete incorporating calcined clay and limestone powder

A.M Salman, M.A Akinpelu, I.T Yahaya · Materials Today: Proceedings · 2023

Clay as a Sustainable Binder for Concrete—A Review

Seyed Sina Mousavi, Chandrasekhar Bhojaraju, Claudiane Ouellet-Plamondon · Construction Materials · 2021

Use of clay-containing waste as pozzolanic additives

Andrei Gerasimov, Ivan Ustinov, Olga Zyryanova · Journal of Mining Institute · 2023

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

7

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.