Skip to content
Research Article Open access CC BY 4.0

Comprehensive Review of Crop Water Requirement Estimation Techniques: Approaches, Challenges, and Future Directions

Sakshi Dixit, Vikas K. Singh, Shivam, Ankit, Vipin Kumar Roshan, Sarvda Nand Tiwari, Akanksha Mathur, Mo Akram, Khwahiz Ali

International Journal of Environment and Climate Change · pp. 664–670 · Published 11 Nov 2024

10.9734/ijecc/2024/v14i114576

Abstract

In order to meet the growing demand for water, water scarcity is a significant issue that needs attention. Agriculture crops are not getting enough water because of this problem. Consequently, figuring out how much water a given crop needs requires using the right method. Accurate crop water requirements must be measured in order to schedule irrigation effectively, which in turn leads to efficient crop water management. To restore the lost moisture and promote the best possible growth for plants, irrigation is used. Water management and irrigation scheduling fundamentally depend on an accurate calculation of the crop's crop water requirements (ETc). Accurate evapotranspiration measurements are necessary for effective irrigation water management. Evapotranspiration (ET), a process that measures the amount of water lost from soil and crops through transpiration and evaporation processes, respectively, is dependent on a variety of meteorological factors. A significant factor in determining crop water requirements and irrigation schedules is reference evapotranspiration. There exist multiple theories and methodologies for estimating reference evapotranspiration, ranging from empirical to physical based.  Reference Evapotranspiration is referred to the idea behind ET is to calculate ET based on a reference surface that is comparable to a deep surface of green grass that is consistently growing, completely covering the surface with enough water, and looking stable. The goal of irrigation futures is to choose a suitable model for estimating reference crop evapotranspiration. In order to calculate the amount of water needed for a crop, multiply ETo by the crop coefficient (Kc), which is dependent on the phases and length of a crop's growth. Regression, fuzzy logic, Penman-Monteith, Blaney-Criddle, Hargreaves, ANN and WNN, and other conventional and non-traditional methods are used to estimate ETo.

Crop water requirements evapotranspiration reference evapotranspiration crop coefficient

Cited by 5

Crop water requirements assessment in the irrigation-scarce Terai plain: a case study of Rohini Rural Municipality, Nepal

Hridyesh Chandra Yadav, Raghu Nath Prajapati · Water Practice & Technology · 2025

Showing 2 of 5 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

5

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.