Skip to content
Research Article Open access CC BY 3.0

Evaluation of Shear Bond Strength of Resin Reinforced Glass Ionomer Cement Modified by Nano-hydroxyapatite on Ceramic Bracket Debonding Using Full-dimension Wire

Elaheh Seyed Tabaii, Mohsen Nuri Sari

Annual Research & Review in Biology · pp. 1578–1586 · Published 1 Feb 2014

10.9734/ARRB/2014/8560

Abstract

Aim: Using fluoride releasing materials such as Glass Ionomer Cement (GIC), can control the demineralization around brackets. In this study, the shear bond strength of resin reinforced GIC modified by Nano-hydroxyapatite (NHA) on ceramic bracket debonding is evaluated. In addition, using full-dimension wire for safe debonding is also examined. Study Design: Original article. Place and Duration of Study: Department of Dentistry, Shahed University, Tehran, IRAN, June 2013. Methods and Material: 80 extracted human premolars received from a clinic were partitioned into 4 groups. Bonding materials used in each group was as follows: Group 1: Transbond XT as a control group, Group 2: Resin Modified GIC (RMGIC), Group 3: RMGIC added 5% NHA and Group 4: RMGIC added 10% NHA. In all groups the enamel was etched with 37% phosphoric acid and ceramic brackets were used. Each group halved into 2 subgroups which just in one of them full dimension wire was employed at the time of debonding. The shear bond strength, Adhesive Remnant Index (ARI) and bracket failure figures were collected for each group. The data was latter analyzed using one-way Analysis Of Variance (ANOVA), Tukey’s HSD (Honestly Significant Difference) Post-hoc and Kruskal Wallis Test methods. Results: According to ANOVA, RMGIC added 5% NHA has no negative effect while adding 10% NHA lowered the shear bond strength significantly. No bracket failure occurred at debonding, either using or not using full dimension wire. ARI for RMGIC groups were more cohesive than the control group. Conclusion: RMGIC containing 5% NHA contributes bond strength similar to composite resins, in bonding ceramic brackets, while its known demineralization resistance is a favor.

Resin modified glass ionomer cement nano-hydroxyapatite shear bond strength ceramic brackets.

References (23)

  1. 1 Contemporary Orthodontics (2012) [DOI]
  2. 2 Effects of incorporation of hydroxyapatite and fluoroapatite nanobioceramics into conventional glass ionomer cements (GIC) [DOI]
  3. 3 Hydroxyapatite nanorods as novel fillers for improving the properties of dental adhesives: Synthesis and application [DOI]
  4. 4 Water absorption characteristics of dental composites incorporating hydroxyapatite filler [DOI]
  5. 5 Mechanical properties of visible light-cured resins reinforced with hydroxyapatite for dental restoration [DOI]
  6. 6 Modification of conventional glass-ionomer cements with N-vinylpyrrolidone containing polyacids, nano-hydroxy and fluoroapatite to improve mechanical properties [DOI]
  7. 7 Toughness, bonding and fluoride-release properties of hydroxyapatite-added glass ionomer cement [DOI]
  8. 8 Comparison of bond strength of three adhesives: Composite resin, hybrid GIC, and glass-filled GIC [DOI]
  9. 9 A study of glass-ionomer cement and its interface with enamel and dentin using a low-temperature, high-resolution scanning electron microscopic technique.
  10. 10 Dental composites reinforced with hydroxyapatite: Mechanical behavior and absorption/elution characteristics [DOI]
  11. 11 Physical Properties of Resin-Reinforced Glass Ionomer Cement Modified with Micro and Nano-Hydroxyapatite [DOI]
  12. 12 Effect of self-etching primer/adhesive and conventional bonding on the shear bond strength in metallic and ceramic brackets [DOI]
  13. 13 Effects of conventional and high-intensity light-curing on enamel shear bond strength of composite resin and resin-modified glass-ionomer [DOI]
  14. 14 Comparison of bracket debonding force between two conventional resin adhesives and a resin-reinforced glass ionomer cement: an in vitro and in vivo study. [DOI]
  15. 15 Synthesis and characterization of nano-HA/PA66 composites [DOI]
  16. 16 Metallic brackets bonded with resin-reinforced glass ionomer cements under different enamel conditions. [DOI]
  17. 17 Shear bond strength of fluoride-releasing orthodontic bonding and composite materials [DOI]
  18. 18 The force levels required to mechanically debond ceramic brackets: an in vitro comparative study [DOI]
  19. 19 Bond strength of orthodontic light-cured resin-modified glass ionomer cement [DOI]
  20. 20 Etching conditions for resin-modified glass ionomer cement for orthodontic brackets [DOI]
  21. 21 Effects of enamel deproteinization on bracket bonding with conventional and resin-modified glass ionomer cements [DOI]
  22. 22 Effect of etching and light-curing time on the shear bond strength of a resin-modified glass ionomer cement [DOI]
  23. 23 Anex vivoassessment of resin-modified glass ionomer bonding systems in relation to ceramic bracket debond [DOI]

Cited by 6

Effect of Adding Nano Silver-Hydroxyapatite to the Orthodontic Primer on Bracket-Enamel Shear Bond Strength

M. A. Gilani, Nazila Ameli, R. Ghorbani · Journal of Evolution of Medical and Dental Sciences · 2020

Article metrics

Real usage data collected on this platform.

40

Page views

0

PDF downloads

2

Outbound clicks

6

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.