Skip to content
Research Article Open access CC BY 3.0

Corrosion Performance of Steel Coated with Different Duplex Systems and Exposed to Salt Spray and Continuous Immersion Tests

A. R. Di Sarli, C. I. Elsner

Advances in Research · pp. 153–178 · Published 22 Feb 2014

10.9734/AIR/2014/8473

Abstract

55%Al-Zn alloy coated steel sheets pre-treated with 5% Fe (NO3)3 + 15% H3PO4 solution, coated with acrylic (AC), alkyd (AQ), vinyl (VL), solvent-based epoxy (ES) or waterborne epoxy (EA) corrosion-inhibiting primers + a barrier topcoat alkyd paint, and exposed to different media were studied. Exposure conditions included salt spray or continuous immersion in solutions containing chloride or sulphate ions. The state of the exposed samples was evaluated by visual inspections, standardized physicochemical tests and electrochemical impedance (EIS) measurements. Their results allowed inferring that: 1) under immersion conditions, the best performance was offered by the ES samples; 2) most of the painting systems performed satisfactorily during their exposure to the salt spray chamber; and 3) the correlation between them permitted to explain some problems arising in service and opened the door to extend the useful life by adjusting the painting system formulation.  

Steel/55%Al-Zn painting systems salt spray immersion tests corrosion blistering EIS

References (33)

  1. 1 Electrical measurements in the study of immersed paint coatings on metal. I. Comparison between capacitance and gravimetric methods of estimating water‐uptake [DOI]
  2. 2 Short-Term Deterioration of Polymer-Coated 55% Al-Zn – Part 1: Behavior of Thin Polymer Films [DOI]
  3. 3 Corrosion resistance of painted zinc alloy coated steels [DOI]
  4. 4 Corrosion control by organic coatings
  5. 5 AC impedance study on corrosion of 55%Al–Zn alloy-coated steel under thin electrolyte layers [DOI]
  6. 6 Comparative corrosion behaviour of 55Aluminium–zinc alloy and zinc hot-dip coatings deposited on low carbon steel substrates [DOI]
  7. 7 Evaluation of the surface treatment effect on the anticorrosive performance of paint systems on steel [DOI]
  8. 8 An electrochemical study of the delamination of polymer coatings on galvanized steel [DOI]
  9. 9 Performance of coated steel systems exposed to different mediaPart I. Painted galvanized steel [DOI]
  10. 10 Cut-edge corrosion of a Zn–55Al-coated steel: A comparison between sulphate and chloride solutions [DOI]
  11. 11 Corrosion protection of galvanized steel by polyimide coatings: EIS and SEM investigations [DOI]
  12. 12 The Electrical Properties of Protective Polymer Coatings as Related to Corrosion of the Substrate [DOI]
  13. 13 In situ determination of the loss of adhesion of barrier epoxy coatings using electrochemical impedance spectroscopy [DOI]
  14. 14 Zinc-Rich Paints on Steels in Artificial Seawater by Electrochemical Impedance Spectroscopy [DOI]
  15. 15 Evaluation of the surface treatment effect on the corrosion performance of paint coated carbon steel [DOI]
  16. 16 A SEM study on the galvanic protection of zinc-rich paints [DOI]
  17. 17 Performance of coated steel systems exposed to different media [DOI]
  18. 18 Application of EIS and SKP methods for the study of the zinc/polymer interface [DOI]
  19. 19 The characterization of protective properties for some naval steel/polimeric coating/3% NaCl solution systems by EIS and visual assessment [DOI]
  20. 20 High anticorrosion chromate-free passive films made by Titanate and waterborne polyurethane on galvanized steel sheet [DOI]
  21. 21 The influence of the method of application of the paint on the corrosion of the substrate as assessed by ASTM and electrochemical method [DOI]
  22. 22 The Mechanism of Corrosion of Polybutadiene-Coated Steel in Aerated Sodium Chloride [DOI]
  23. 23 On the Mechanism for Improved Passivation by Addition of Molybdenum to Austenitic Stainless Steels in O-Phosphoric Acid [DOI]
  24. 24 The Role of Molybdenum as an Inhibitor of Localized Corrosion on Iron in Chloride Solutions [DOI]
  25. 25 Paint adhesion and corrosion performance of chromium-free pretreatments of 55 % Al-Zn-coated steel [DOI]
  26. 26 Development of a new organic composite coating for enhancing corrosion resistance of 55% Al–Zn alloy coated steel sheet [DOI]
  27. 27 Impedance measurements on lacquered tinplate: fitting with equivalent circuits [DOI]
  28. 28 Une méthode électrochimique rapide de prédétermination de la corrosion atmosphérique [DOI]
  29. 29 A mathematical basis for calculating the water permeability of organic films supported by metal substrates [DOI]
  30. 30 Cut Edge Corrosion Inhibition by Chromate in Primer of Prepainted 55% Al–Zn Alloy Coated Steel [DOI]
  31. 31 The Use of Ac Impedance to Determine the Corrosion Rate of Electrogalvanized Steel [DOI]
  32. 32 Characterization of protective properties for some naval steel / polymeric coating / 3% nacl solution systems by eis and visual assessment
  33. 33 Corrosion Protection by Organic Coatings [DOI]

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

41

Page views

0

PDF downloads

16

Outbound clicks

0

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.