Skip to content

All published articles 1500

Training for the Future? A Case of Automotive Training in TVET Institutions in Kenya

Kisilu M. Kitainge · Current Journal of Applied Science and Technology · 2016

Aims: To evaluate the opinions of the automotive trainers on the extent to which their training programs were futuristic in content and organization. To establish whether the training was in line with changes in technology in industry; the main emphasis of training and suggestion...

Open access Research Article 10.9734/BJAST/2016/25391

Microfacies and Biostratigraphy of the Limestone-Shale Sequences of Gboko Formation, Middle Benue Trough, Nigeria

O. D. Owonipa, O. A. Okunlola & A. Edema · Current Journal of Applied Science and Technology · 2016

The drive to ascertain the paleodepositional environments of the inland sedimentary basins of Nigeria, necessitates a detailed biostratigraphy studies of limestone-shale sequences of Gboko Formation; Middle Benue Trough, Nigeria. A total of 26 representative samples were collecte...

Open access Research Article 10.9734/BJAST/2016/10869

Production of Methanol from Methane by an Impulse Discharge on the Water Surface

Masato Mukawa, Takafumi Tanno & Satoru Iizuka · Current Journal of Applied Science and Technology · 2016

Production of methanol from methane was investigated by a low pressure impulse discharge on the surface of the water without using catalysis. Methane was introduced above the water surface and mixed with steam generated by the heat supplied by the discharge. Discharge parameters...

Open access Research Article 10.9734/BJAST/2016/26682

Investigation of Saturation Thickness of Sn Using Backscattering Technique

Renu Sharma, J. K. Sharma & Tejbir Singh · Current Journal of Applied Science and Technology · 2016

In this paper, the energy dependence of saturation thickness for Sn target has been investigated at different gamma rays photon energies of 122, 511 and 662 keV using backscattering technique. The back scattered photon spectra for different thicknesses (0.2 – 2.13 cm) of tin (50S...

Open access Research Article 10.9734/BJAST/2016/26514

Assessment of in vitro Gas and Methane Production of Diet Fortified with Yeast and Lactobacilli spp.

T. O. Ososanya & U. A. Inyang · Current Journal of Applied Science and Technology · 2016

The effect of dietary fortification of two levels of bakers yeast and yeast plus Lactobacilli against negative control and positive control (antibiotic) was assessed on in vitro gas production (IVGP) kinetics and methane production at 24 hours incubation. A concentrate diet was f...

Open access Research Article 10.9734/BJAST/2016/19166

Qualimetric Assessment of Students’ Research Competence within the Context of Education Informatization

Olga Popova, Dmitry Romanov & Marina Evseeva · Current Journal of Applied Science and Technology · 2016

Aims: Is building a model for assessing students’ research competence. Study Design: Experimental testing of the assessment model for students’ research competence. Place and Duration of Study: Students (n=648, 2009, 2010 и 2011 enrolment years) at technical university – Kuban St...

Open access Research Article 10.9734/BJAST/2016/26339

Evaluation of Arsenic and Lead Soil Contamination by Wooden Electric and Telephone Poles in Two Urban Cities

Lovell Agwaramgbo, Jude Alinnor, Sha’Kayla Nunez & Peter Uhuegbue · Current Journal of Applied Science and Technology · 2016

Arsenic and lead have been reported to have toxic effect on human and animal health. Wooden electric and telephone poles have been known to be treated with chromated copper arsenate (CCA) in an effort to preserve them from decay, termites, insects, and rot. Thus, those who work o...

Open access Research Article 10.9734/BJAST/2016/26255

Evaluation and Comparison of Effect of Different Surface Treatments and Varying Alloy Percentage on the Elemental Composition of Ni Cr Base Metal Alloy

Divya Goel, Ramesh P. Nayakar & Raghunath Patil · Current Journal of Applied Science and Technology · 2016

Aim: To evaluate and compare the Effect of Different Surface Treatments and Varying Alloy Percentage on The Elemental Composition of Ni Cr Base Metal Alloy. Study Design: The elemental composition of Ni Cr alloy with different surface treatments (oxidation, sandblasting, silane c...

Open access Research Article 10.9734/BJAST/2016/26204

Campus Sustainability Assessment: The Case of University of Cape Coast, Ghana

Sarah Darkwa & Hannah Edjah · Current Journal of Applied Science and Technology · 2016

Aims: To assess buildings and their subsequent impact on land and energy use to validate campus sustainability.   Study Design:  A survey. Place of Study: Department of Vocational & Technical Education, University of Cape Coast. Methodology: A questionnaire was administered t...

Open access Research Article 10.9734/BJAST/2016/25553

Experimental and Numerical Investigation of Combined Photovoltaic-Thermal Solar System in Hot Climate

A. A. Ghoneim & A. M. Mohammedein · Current Journal of Applied Science and Technology · 2016

Hybrid photovoltaic-thermal solar system (PVT) which generates electricity and heat simultaneously is well known technology; however they are still need more development and collaboration. The proposed combination can offer economical advantages compared to a combination of separ...

Open access Research Article 10.9734/BJAST/2016/26151

Structural Investigations on Na2O – CaO-V2O5- SiO2 Bioglass Ceramics

G. El-Damrawi, A. K. Hassan, H. Kamal, M. Aboelez & S. Labeeb · Current Journal of Applied Science and Technology · 2016

All as obtained glasses in the system 24.5 Na2O-24.5 CaO-6 P2O5- xV2O5 (45-x) SiO2 (x ranges from 0-15 mole %) are transparent and have an amorphous network structure. Glasses containing up to 6 mol% V2O5 still transparent upon heat treatment at 660°C for 4 hours. On the other ha...

Open access Research Article 10.9734/BJAST/2016/26683

Glass-Polymer- Concrete Composite and Its Mechanical, Chemical and Thermal Properties

A. M. Badiea, B. G. Mohammed & A. Albadran Firas · Current Journal of Applied Science and Technology · 2016

In this research, the production of glass-polymer-concrete (GPC) composite and comparing of its mechanical, chemical and thermal properties with the reference concrete have been investigated. The present work deals with study of ternary blended concrete with glass waste and polym...

Open access Research Article 10.9734/BJAST/2016/25779

Study of Air Temperatures within the Enclosure of a Model of Traditional Habitat Bilobate and Rectangular

Issaka Ouedraogo, Priscilla Simonis, Alioune Ouedraogo & Belkacem Zeghmati · Current Journal of Applied Science and Technology · 2016

This article shows the experimental and numerical results of thermal comfort of two models of traditional habitats. The traditional habitat is bilobate and rectangular model. In the bilobate model, I obtained the following air temperatures by measurement: 29.6-31.6°C the day and...

Open access Research Article 10.9734/BJAST/2016/26286

Model Developed for Competing Accessory, Spare Parts and Miscellaneous Costs for Limited Available Budget under Machine Availability

B. O. Akinnuli, O. O. Ojo & V. A. Balogun · Current Journal of Applied Science and Technology · 2016

In a developing company or industry where there is availability of machines to keep the industry running effectively, a need always arise to consider the accessories and the spare parts which will enhance the production planning and also affects the economic growth of the company...

Open access Research Article 10.9734/BJAST/2016/23025