Skip to content
Research Article Open access CC BY 3.0

Experimental Production of Sustainable Lightweight Foamed Concrete

Alonge O. Richard, Mahyuddin Ramli

Current Journal of Applied Science and Technology · pp. 994–1005 · Published 12 Jul 2013

10.9734/BJAST/2013/4242

Abstract

Lightweight foamed concrete is recently acceptable for use in low strength capacity for building and civil construction purposes as a result of its peculiar features such as low thermal conductivity, low self weight and self compacting features hence its high workability. But it major demerits is its difficulty of high strength development when compared with normal concrete. The maximum strength achieved so far is less than 25MPa even at higher density of between 1500kg/m3 and 1800kg/m3. Strength development of foamed concrete depends largely on some factors which are the constituents of the base mix, the density of foam and the water cement ratio of the base mix. This paper studies the base mix parameters to produce a sustainable foamed concrete by substituting cement which is a source of carbon dioxide, a green house emission elements, with a cementitious material, fly ash within a range of 10% up to 50% and water cement ratio of 3.0 was used. Notraite PA-1 was used as foam agent and prefoamed method was adopted for the production of the foamed concrete. With a target density of 1600kg/m3, the compressive strength result of 10.5MPa reveals that a high strength sustainable foamed concrete structural panel could only be produced with 10% replacement of cement.

Concrete sustainable concrete lightweight foamed concrete compressive strength fly ash.

Cited by 20

Effect of Different Types and Ratio of Fibers on the Tensile Strength of Reinforced Foam Concrete: A Review

Soran Abdrahman Ahmad, Azhar Jawad Nimat, Hersh F. Mahmood · Emerging Technologies and Engineering Journal · 2024

Building blocks as infills: Current scenario and alternate materials

Sajan K Jose, Mini Soman, Y Sheela Evangeline · IOP Conference Series: Materials Science and Engineering · 2020

Predictive modelling of sustainable lightweight foamed concrete using machine learning novel approach

Haji Sami Ullah, Rao Arsalan Khushnood, Junaid Ahmad · Journal of Building Engineering · 2022

Mechanical Behaviour, Properties and Characteristics of Foamed Cellular Concrete: A Review

Facundo Atuel Retamal, Viviana Carolina Rougier · Advanced Materials Research · 2022

Effect of pre-treated incineration bottom ash as sand replacement material to compressive strength of foamed concrete

Norlia Mohamad Ibrahim, Khairul Nizar Ismail, Roshazita CheAmat · AIP Conference Proceedings · 2018

Experimental Study on Application Performance of Foamed Concrete Prepared Based on a New Composite Foaming Agent

Youqiang Qiu, Liujun Zhang, Yashao Chen · Advances in Materials Science and Engineering · 2022

Graphene oxide-reinforced thin shells for high-performance, lightweight cement composites

Wei Wang, Shu Jian Chen, Kwesi Sagoe-Crentsil · Composites Part B: Engineering · 2022

Preparation and characterization of ultra-lightweight foamed geopolymer (UFG) based on fly ash-metakaolin blends

Jiandong Wu, Zerui Zhang, Yi Zhang · Construction and Building Materials · 2018

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

20

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.