Skip to content
Research Article Open access CC BY 4.0

The effect of TiO2 Nanoparticles in Epoxy Paint Formulation on Metal Surfaces

Le Huy Hai, Le Mai Xuan Truc, Nguyen Quoc Trung

Journal of Engineering Research and Reports · pp. 90–96 · Published 22 Jul 2021

10.9734/jerr/2021/v20i1017392

Abstract

Currently, epoxy paint is being widely used in the industry. Nanotechnology can create many small nanometer-sized materials with many applications, it has brought many outstanding properties to epoxy paints. The aim of this study is to investigate the effect of TiO2 nanoparticles in epoxy paint formulation towards metal surface. We created a sample of two-component epoxy paint, part A is epoxy resin, anti-sedimentation, dispersant substance, foam breaking agent, cover substance, solvent, other additives, and part B is a curing agent for epoxy resins.  Methods of analyzing the properties of the epoxy paint film are based on Vietnam standards. TiO2 nanoparticles are a good coating substance in epoxy paint. The study results showed that TiO2 nanoparticles have increased the properties of the epoxy paint film, improving the Impact and Glossy of the epoxy paint film. TiO2 nanoparticles increases from 1% to 6% by weight, the impact increased by about 18.75%.  (80 to 96 kg.cm), Glossy 600 increased by about 12.79% (80 to 97). Adding TiO2 nanoparticles to epoxy paint has increased Impact and Glossy for the paint film. The higher the rate of TiO2 nanoparticles, the better the properties of the epoxy paint film. Therefore, TiO2 nanoparticles are a good coating in epoxy paint, it improves the properties of the paint film. Because the cost of nanomaterials is higher than that of normal coating materials, the nanomaterial should only be added with a ratio of about 2-5% by weight.

Coating powder epoxy resin metal surfaces paint film TiO2 nanoparticles

References (14)

  1. 1 Synthesis and application of epoxy resins: A review [DOI]
  2. 2 Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating [DOI]
  3. 3 Evaluation of corrosion protection properties of additives for waterborne epoxy coatings on steel [DOI]
  4. 4 Epoxy in nanotechnology: A short review [DOI]
  5. 5 Effect of Nanoparticles on the Thermal and Mechanical Properties of Epoxy Coatings [DOI]
  6. 6 Evaluation of nanoparticle emission for TiO2 nanopowder coating materials [DOI]
  7. 7 The curing kinetics and thermal properties of epoxy resins cured by aromatic diamine with hetero-cyclic side chain structure [DOI]
  8. 8 Cure kinetics of epoxy resin and aromatic diamines [DOI]
  9. 9 Synthesis, characterization, and properties of silicone–epoxy resins [DOI]
  10. 10 Synthesis and characterization of emulsion‐type curing agent of water‐borne epoxy resin [DOI]
  11. 11 Synthesis and Characterization of Waterborne Epoxy Curing Agent Modified by Silane [DOI]
  12. 12 Mechanical properties of amine-cured epoxy composites reinforced with pristine protonated titanate nanotubes [DOI]
  13. 13 Development and Evaluation of Nano-Silica Dispersed Polyurethane Based Coatings for Improved Anti-Graffiti and Scratch Resistance [DOI]
  14. 14 Synthesis of Nonionic Type Self-emulsified Waterborne Epoxy Curing Agent and its Properties

Cited by 3

Showing 1 of 3 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

69

Page views

0

PDF downloads

24

Outbound clicks

3

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.