Sorrel (Hibiscus sabdariffa) Seed Oil Extraction Optimization and Quality Characterization
Chemical Science International Journal · pp. 449–458 · Published 24 Jul 2013
10.9734/ACSJ/2013/2777Abstract
Aims: This study was aimed at separating seed oil from sorrel (Hibiscus sabdariffa) oilseeds using application of solvent extraction method. The process was optimized using response surface methodology and the quality of the seed oil was determined. Methodology: Optimization of oil extraction from the oilseeds using response surface methodology was carried out. The effects of three independent factors (extraction time, solvent volume and sample weight) and their respective interactions on the response, oil yield, were investigated. A total of 17 experimental runs were generated using Box-Behnken design. The extracted seed oil was characterized to determine its quality. Results: A quadratic polynomial was obtained to predict the oil yield and the ANOVA test showed the developed model to be significant (P < 0.05). A statistical model predicted the maximum seed oil yield to be 18.25% at the optimal condition of sample weight, 22g, solvent volume, 157 ml and time, 2 h. The optimized condition was validated with the actual oil yield of 17.85%, which was well within the range predicted. The seed oil analysis showed the physical state of the oil to be liquid/yellow-greenish in colour, specific gravity 0.886 ± 0.026, viscosity (at 40ºC) 15.40 cP, p-anisidine value 6.31, Totox number 16.31, %FFA 0.40 ± 0.01, acid value 0.80 ± 0.01 mg KOH.g oil-1, saponification value 197.75 ± 0.05 mg KOH.g oil-1, iodine value 97.77 ± 0.02 g I2.100 g oil-1, peroxide value 5.00 ± 0.01 meq O2.kg oil-1 and cetane number 51.90 ± 0.1. The fatty acid profile of the oil revealed that it is highly unsaturated (76.45%) with linoleic acid the highest (44.39%). Conclusion: The physicochemical analysis of the sorrel seed oil indicated it is edible and could serve as feedstock for many industrial applications.
References (15)
- 1 Physicochemical properties and bioactive compounds of selected seed oils [DOI]
- 2 Optimization of conversion of waste rapeseed oil with high FFA to biodiesel using response surface methodology [DOI]
- 3 Fuel properties and calculation of higher heating values of vegetable oils [DOI]
- 4 Optimization of Viscozyme L-assisted extraction of oat bran protein using response surface methodology [DOI]
- 5 Fats and Oils Handbook [DOI]
- 6 Extraction and physicochemical properties of low free fatty acid crude palm oil [DOI]
- 7 Application of response surface methodology for optimizing transesterification of Moringa oleifera oil: Biodiesel production [DOI]
- 8 Roselle (Hibiscus sabdariffa) Seed Oil Is a Rich Source of γ‐Tocopherol [DOI]
- 9 Pumpkin (Cucurbita maxima) seed oil extraction using supercritical carbon dioxide and physicochemical properties of the oil [DOI]
- 10 Response surface method applied to supercritical carbon dioxide extraction of Vetiveria zizanioides essential oil [DOI]
- 11 Characteristics and composition of Washingtonia filifera (Linden ex André) H. Wendl. seed and seed oil [DOI]
- 12 Roselle (Hibiscus sabdariffa L.) oil as an alternative feedstock for biodiesel production in Thailand [DOI]
- 13 Roselle (Hibiscus sabdariffa) [DOI]
- 14 Optimization of oil extraction from locust bean using response surface methodology [DOI]
- 15 Non‐hydrogenated cottonseed oil as a deep‐fat frying medium [DOI]
Cited by 29
Robinson Timung, C. R. Barik, Sukumar Purohit · 2016
S. O. Ajala, E. Betiku · 2015
C. Agu, M. Menkiti, C. Kadurumba · 2015
M. Stroescu, A. Stoica, O. Pârvulescu · 2015
A. M. Akintunde, S. O. Ajala, E. Betiku · 2015
Iosr Journals, Rashmi Gadwal, G. R. Naik · 2014
Rashmi Gadwal, G. R. Naik · 2015
H. Padmaja, S. Sruthi, Meena Vangalapati · 2014
Balde Samba, Ayessou Nicolas Cyrille, Khadim Niane · Food and Nutrition Sciences · 2022
Related research
- Modelling and Optimisation of Yoghurt Production from Tigernut (Cyperus esculentus L.) Using Response Surface Methodology (RSM) — shares topic coverage
- Determination of Optimum Processing Conditions for the Proximate Composition and Pasting Characteristics of Flour Made from Parboiled Cassava Chips: A Response Surface Analysis — shares topic coverage
- Process Optimization and Characterization of Gamma Irradiation Induced Variations in Functional Properties of Maize (Zea mays L.) Flour — shares topic coverage
- Optimization of Quinoa Seed Powder for Preparation of Sugarfree Burfi by Response Surface Methodology (RSM) — shares topic coverage
- Optimization of African Breadfruit Based Complementary Food Using Mixture Response Surface Methodology — shares topic coverage
Article metrics
Real usage data collected on this platform.
44
Page views
0
PDF downloads
3
Outbound clicks
29
Citations
Views over time
Views by country
Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".
Traffic sources
Referring site, by host.
Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.