Quantifying Resistance to Sliding in Orthodontics: A Systematic Review

References (123)

1. 1 A comparative study of frictional resistances between orthodontic bracket and arch wire [DOI]
2. 2 Evaluation of friction between edgewise stainless steel brackets and orthodontic wires of four alloys [DOI]
3. 3 Evaluation of friction during sliding tooth movement in various bracket-arch wire combinations [DOI]
4. 4 Evaluation of friction forces in the 0·022 × 0·028 edgewise bracket in vitro [DOI]
5. 5 The influence of the SPEED bracket's self-ligating design on force levels in tooth movement: A comparative in vitro study [DOI]
6. 6 Coefficients of friction for arch wires in stainless steel and polycrystalline alumina bracket slots. I. The dry state [DOI]
7. 7 A comparison of self-ligating and conventional orthodontic bracket systems. [DOI]
8. 8 Comparative friction of orthodontic wires under dry and wet conditions [DOI]
9. 9 Frictional properties of metal and ceramic brackets.
10. 10 Frictional resistance between orthodontic brackets and archwires in the buccal segments. [DOI]
11. 11 In vitro study of frictional forces during sliding mechanics of “reduced-friction” brackets [DOI]
12. 12 A stainless steel bracket for orthodontic application [DOI]
13. 13 Friction of orthodontic elastomeric ligatures with different dimensions. [DOI]
14. 14 In Vitro Frictional Forces Generated by Three Different Ligation Methods [DOI]
15. 15 Effects of sliding velocity on the coefficients of friction in a model orthodontic system [DOI]
16. 16 Frictional Resistance of Three Types of Ceramic Brackets [DOI]
17. 17 Frictional resistances in stainless steel bracket-wire combinations with effects of vertical defections [DOI]
18. 18 The Ex Vivo Effect of Ligation Technique on the Static Frictional Resistance of Stainless Steel Brackets and Archwires [DOI]
19. 19 A study of force application, amount of retarding force, and bracket width in sliding mechanics [DOI]
20. 20 The friction and wear patterns of orthodontic brackets and archwires in the dry state [DOI]
21. 21 Friction between different wire bracket combinations in artificial saliva: an in vitro evaluation [DOI]
22. 22 Friction: validation of manufacturer’s claim [DOI]
23. 23 Frictional forces and surface topography of a new ceramic bracket [DOI]
24. 24 Comparison of frictional resistance after immersion of metal brackets and orthodontic wires in a fluoride-containing prophylactic agent [DOI]
25. 25 Friction coefficients and wear rates of different orthodontic archwires in artificial saliva [DOI]
26. 26 Coating NiTi archwires with diamond-like carbon films: reducing fluoride-induced corrosion and improving frictional properties [DOI]
27. 27 Frictional characteristics of composite orthodontic archwires against stainless steel and ceramic brackets in the passive and active configurations [DOI]
28. 28 Comparison of the frictional resistance between archwire and different bracket system: An in vitro study [DOI]
29. 29 In-vitro evaluation of frictional resistance with 5 ligation methods and Gianelly-type working wires [DOI]
30. 30 Relationship between friction force and orthodontic force at the leveling stage using a coated wire [DOI]
31. 31 Physical and chemical properties of orthodontic brackets after 12 and 24 months: in situ study [DOI]
32. 32 In vitro friction of stainless steel arch wire–bracket combinations in air and different aqueous solutions [DOI]
33. 33 Third-Order Torque and Self-Ligating Orthodontic Bracket–Type Effects on Sliding Friction [DOI]
34. 34 Archwire depth is a significant parameter in the frictional resistance of active and interactive, but not passive, self-ligating brackets [DOI]
35. 35 Frictional resistance to sliding archwires with repeated displacement [DOI]
36. 36 Frictional characteristics of the newer orthodontic elastomeric ligatures [DOI]
37. 37 Effect of salivary viscosity on frictional coefficients of orthodontic archwire/bracket couples [DOI]
38. 38 Role of lubricants on friction between self-ligating brackets and archwires [DOI]
39. 39 Comparative study of friction between metallic and conventional interactive self-ligating brackets in different alignment conditions [DOI]
40. 40 Evaluation of the effect of bracket and archwire composition on frictional forces in the buccal segments [DOI]
41. 41 In vivo comparison of the friction forces in new and used brackets.
42. 42 The influence of ligation on frictional resistance to sliding during repeated displacement [DOI]
43. 43 Improvement of the friction behaviour of NiTi orthodontic archwires by nitrogen diffusion.
44. 44 Static–dynamic friction transition of FRP esthetic orthodontic wires on various brackets by suspension‐type friction test [DOI]
45. 45 Comparison of frictional resistance of esthetic and semi-esthetic self-ligating brackets [DOI]
46. 46 Efficacy of Super Slick Elastomeric Modules in reducing Friction during Sliding: A Comparative in vitro Study [DOI]
47. 47 In vitro frictional behavior and wear patterns between contemporary and aesthetic composite orthodontic brackets and archwires [DOI]
48. 48 Frictional Forces of Conventional and Improved Superelastic NiTi-Alloy Orthodontic Archwires in Stainless Steel and Plastic Brackets [DOI]
49. 49 Resistance to Sliding in Clear and Metallic Damon 3 and Conventional Edgewise Brackets: an In vitro Study.
50. 50 Influence of Shape Memory Properties on Sliding Resistance in Fixed Orthodontic Appliances [DOI]
51. 51 Preferred reporting items for systematic reviews and meta-analyses: the PRISMA statement [DOI]
52. 52 Frictional forces between bracket and arch wire [DOI]
53. 53 A comparative study of conventional ligation and self-ligation bracket systems [DOI]
54. 54 A comparative study of frictional forces between orthodontic brackets and arch wires [DOI]
55. 55 Frictional forces related to self-ligating brackets [DOI]
56. 56 The effect of ligation method on friction in sliding mechanics [DOI]
57. 57 Occlusal force, electromyographic activity of masticatory muscles and mandibular flexure of subjects with different facial types [DOI]
58. 58 A comparison of the forces required to produce tooth movement in vitro using two self-ligating brackets and a pre-adjusted bracket employing two types of ligation [DOI]
59. 59 The dynamnic frictional resistance between orthodontic brackets and arch wires [DOI]
60. 60 Evaluation of methods of archwire ligation on frictional resistance [DOI]
61. 61 Resistance to sliding with 3 types of elastomeric modules [DOI]
62. 62 Evaluation of frictional resistance in esthetic brackets [DOI]
63. 63 Frictional changes in force values caused by saliva substitution [DOI]
64. 64 Interactive edgewise mechanisms: Form and function comparison with conventional edgewise brackets [DOI]
65. 65 Clinical ligation forces and intraoral friction during sliding on a stainless steel archwire [DOI]
66. 66 Physical, mechanical, and flexural properties of 3 orthodontic wires: An in-vitro study [DOI]
67. 67 Effects of a diamond-like carbon coating on the frictional properties of orthodontic wires [DOI]
68. 68 Effects of intraoral aging on surface properties of coated nickel-titanium archwires [DOI]
69. 69 Frictional properties of aesthetic brackets [DOI]
70. 70 A study of the frictional characteristics of four commercially available self-ligating bracket systems [DOI]
71. 71 Frictional resistance of self-ligating versus conventional brackets in different bracket-archwire-angle combinations [DOI]
72. 72 Self-Ligation Esthetic Brackets with Low Frictional Resistance [DOI]
73. 73 Evaluation of frictional forces between ceramic brackets and archwires of different alloys compared with metal brackets [DOI]
74. 74 A comparison of resistance to sliding of self-ligating brackets under an increasing applied moment [DOI]
75. 75 A comparative in vitro study of frictional resistance between lingual brackets and stainless steel archwires [DOI]
76. 76 Inorganic Fullerene-Like Tungsten Disulfide Nanocoating for Friction Reduction of Nickel–Titanium Alloys [DOI]
77. 77 Effects of recycling on the mechanical properties and the surface topography of nickel-titanium alloy wires [DOI]
78. 78 Biodegradation of orthodontic metallic brackets and associated implications for friction [DOI]
79. 79 Effect of bracket bevel design and oral environmental factors on frictional resistance [DOI]
80. 80 Analysis of the characteristics of slot design affecting resistance to sliding during active archwire configurations [DOI]
81. 81 Frictional resistance exerted by different lingual and labial brackets: an in vitro study [DOI]
82. 82 Frictional forces between lingual brackets and archwires measured by a friction tester. [DOI]
83. 83 Physical Properties of Conventional and Super Slick Elastomeric Ligatures after Intraoral Use [DOI]
84. 84 Surface roughness of three types of modern plastic bracket slot floors and frictional resistance [DOI]
85. 85 The effect of different combinations of tip and torque on archwire/bracket friction [DOI]
86. 86 “Evaluation of Friction in Orthodontics Using Various Brackets and Archwire Combinations-An in Vitro Study” [DOI]
87. 87 Effect of sodium bicarbonate air abrasive polishing on attrition and surface micromorphology of ceramic and stainless steel brackets [DOI]
88. 88 Effect of dental arch convexity and type of archwire on frictional forces [DOI]
89. 89 Changes in the surface roughness and friction coefficient of orthodontic bracket slots before and after treatment [DOI]
90. 90 Frictional resistance of orthodontic wires tied with 3 types of elastomeric ligatures [DOI]
91. 91 Effect of tooth displacement and vibration on frictional force and stick-slip phenomenon in conventional brackets: a preliminary in vitro mechanical analysis [DOI]
92. 92 The effect upon friction of the degradation of orthodontic elastomeric modules [DOI]
93. 93 Frictional behavior of stainless steel bracket-wire combinations subjected to small oscillating displacements [DOI]
94. 94 Comparison of frictional resistance between self-ligating and conventional brackets tied with elastomeric and metal ligature in orthodontic archwires [DOI]
95. 95 Evaluation of the friction force generated by monocristalyne and policristalyne ceramic brackets in sliding mechanics [DOI]
96. 96 Effects of sliding velocity on friction: An in vitro study at extremely low sliding velocity approximating orthodontic tooth movement [DOI]
97. 97 Bioengineering analysis of orthodontic mechanics [DOI]
98. 98 Frictional resistance in plastic preadjusted brackets ligated with low-friction and conventional elastomeric ligatures [DOI]
99. 99 Evaluation of Static Friction of Polycrystalline Ceramic Brackets after Conditioning with Different Powers of Er:YAG Laser [DOI]
100. 100 Comparative Evaluation of Frictional Forces of Conventional and Self-ligating Bracket Systems: An in vitro Study [DOI]
101. 101 A Study of Frictional Forces between Orthodontic Brackets and Archwires [DOI]
102. 102 The Influence of Bracket Material, Ligation Force and Wear on Frictional Resistance of Orthodontic Brackets [DOI]
103. 103 A Comparison of the Forces Required to Produce Tooth Movement ex vivo through Three Types of Pre-adjusted Brackets When Subjected to Determined Tip or Torque Values [DOI]
104. 104 The Effect of Artificial Saliva on the Frictional Forces between Orthodontic Brackets and Archwires [DOI]
105. 105 A Comparison of the Frictional Characteristics of Five Initial Alignment Wires and Stainless Steel Brackets at Three Bracket to Wire Angulations—an in Vitro Study [DOI]
106. 106 The Effects of Diamond-Like Carbon Films on Fretting Wear Behavior of Orthodontic Archwire-Bracket Contacts [DOI]
107. 107 Comparative Evaluation of Friction Resistance of Titanium, Stainless Steel, Ceramic and Ceramic with Metal Insert Brackets with Varying Dimensions of Stainless Steel Wire: An In vitro Multi-center Study.
108. 108 Comparison of Frictional Forces Generated by a New Ceramic Bracket with the Conventional Brackets using Unconventional and Conventional Ligation System and the Self-ligating Brackets: An In Vitro Study.
109. 109 Frictional resistances of different bracket – wire combinations [DOI]
110. 110 Effects of different ligature materials on friction in sliding mechanics.
111. 111 Frictional forces when rectangular guiding arches with varying edge bevel are employed [DOI]
112. 112 Frictional forces with the friction-free edgewise bracket.
113. 113 Resistance to Sliding in Orthodontics: A Systematic Review
114. 114 Evaluation of frictional forces of polycarbonate self-ligating brackets.
115. 115 The Effects of In-Office Reconditioning on the Slot Dimensions and Static Frictional Resistance of Stainless Steel Brackets [DOI]
116. 116 Étude sur le frottement : les boîtiers auto-ligaturants [DOI]
117. 117 [Comparison study of friction of FAS self-ligating bracket and traditional self-ligating bracket].
118. 118 [Development and preliminary application of orthodontic friction dynamic testing apparatus].
119. 119 [A study of frictional resistance of archwires and ligating methods].
120. 120 Comparative Evaluation of Frictional Properties, Load De fl ection Rate and Surface Characteristics of Different Coloured TMA Archwires - An Invitro Study [DOI]
121. 121 Brackets et frottement en orthodonti : étude expérimentale [DOI]
122. 122 Comparative Evaluation of Frictional Forces of Conventional and Self-ligating Bracket Systems: An in vitro Study [DOI]
123. 123 [Comparison of friction force between Lock-loose bracket and traditional bracket]. [DOI]

Cited by 17

Showing 9 of 17 known citations — external sources report more than can currently be individually listed.

Related research

• Photocatalytic Effects of Acrylic Resins Incorporated with Nano-titanium Dioxide on Planktonic and Biofilm Growth of Four Cariogenic Bacteria — shares topic coverage
• Anti-bacterial Effects of Polymethylmethacrylate with In situ Generated Silver Nanoparticles on Primary Colonizers of Human Dental Plaque and Cariogenic Bacteria — shares topic coverage
• Biphasic Orthodontic Treatment for Severe Class III Malocclusion Using Orthopedics and Orthodontic Camouflage: A Case Report — shares topic coverage
• Evaluation of Ricketts Frontal Analysis Reference Points on Cone-beam Computed Tomography Images — shares topic coverage
• Evaluation of Tensile and Friction Resistance of Various Orthodontic Elastomeric Ligatures — shares topic coverage