Skip to content
Research Article Open access CC BY 4.0

Preparation and Properties of Nanocellulose from Peracetic Flax Pulp

V. Barbash, O. Yashchenko, A. Kedrovska

Journal of Scientific Research and Reports · pp. 1–10 · Published 3 Oct 2017

10.9734/JSRR/2017/36571

Abstract

The aim of the study was to obtain a pulp by ecology safer method from flax fibers and nanocellulose from organosolvent flax pulp (OFP) by acid hydrolysis and to investigate of its quality indexes. The OFP has been obtained by cooking in solution of peracetic acid. For obtaining of nanocellulose the hydrolysis of OFP by sulfuric acid with concentration of 43%, 50% and 64% at temperature 30 - 60°C during 30 and 90 min was carried out. The hydrolyzed OFP was washed by many times centrifugation at 8000 rev/min with distilled water until reaching neutral pH. Further ultrasonic treatment of the nanocellulose suspension from 30 to 60 minutes facilitated the formation of a nanocellulose gel, which was dried on Petri dishes to obtain transparent films. The optimal parameters of hydrolysis process are: concentration of sulfuric acid – 43%, temperature - 60°C duration 60 min. The obtained peracetic flax nanocellulose had degree of crystallinity – 62%, particles with diameter less than 60 nm, which is confirmed by AFM data; the transparency of received films was determined by electron absorption spectra and is more than 60%; the tensile strength up to 70 MPa and Young's module up to 9,0 GPa. The obtained nanocellulose had highest thermal stability compared to the OFP, which established by TGA. The method of obtaining peracetic flax nanocellulose allows obtaining a product with high quality indexes, which can be used in the production of different composite materials and optoelectronics. These predictors, however, need further work to validate reliability.

Flax fibre organosolvent flax pulp nanocellulose acid hydrolysis

References (11)

  1. 1 A comparative study of energy consumption and physical properties of microfibrillated cellulose produced by different processing methods [DOI]
  2. 2 Utilization of various lignocellulosic biomass for the production of nanocellulose: a comparative study [DOI]
  3. 3 Isolation, Characterization, and Application of Nanocellulose from Oil Palm Empty Fruit Bunch Fiber as Nanocomposites [DOI]
  4. 4 Cellulose‐Based Ionogels for Paper Electronics [DOI]
  5. 5 Microfibrillated cellulose from agricultural residues. Part I: Papermaking application [DOI]
  6. 6 Preparation and Properties of Nanocellulose from Organosolv Straw Pulp [DOI]
  7. 7 Preparation of nanocellulose from a kenaf core using E-beam irradiation and acid hydrolysis [DOI]
  8. 8 Extraction of cellulose nanowhiskers from natural fibers and agricultural byproducts [DOI]
  9. 9 Polydopamine functionalized transparent conductive cellulose nanopaper with long-term durability [DOI]
  10. 10 Thermally conductive and optically transparent flexible films with surface-exposed nanocellulose skeletons [DOI]
  11. 11 Influence of high loading of cellulose nanocrystals in polyacrylonitrile composite films [DOI]

Cited by 55

Transforming biomass into batteries: harnessing cellulose and nanocellulose for a sustainable energy storage future

Thivya Selvam, Siti Zafirah Zainal Abidin, Nor Mas Mira Abd Rahman · International Journal of Materials Research · 2025

Effect of sowing time on fibre yield and chemical composition of flax genotypes

Md Mostafizur Rahman, A K M Golam Sarwar Sarwar, Jannatun Nayeem · Bangladesh Journal of Scientific and Industrial Research · 2025

Preparation and Properties of Nanocellulose fromMiscanthus x giganteus

Valerii A. Barbash, Olha V. Yashchenko, Olesia A. Vasylieva · Journal of Nanomaterials · 2019

Biotechnological innovations in nanocellulose production from waste biomass with a focus on pineapple waste

Prakash Kumar Sarangi, Rajesh Kumar Srivastava, Uttam Kumar Sahoo · Chemosphere · 2024

ЛЕН И ЕГО ПЕРЕРАБОТКА: ОБЗОР

Ю.А. Гисматулина · Технологии и оборудование химической, биотехнологической и пищевой промышленности · 2021

Facile preparation of magnetite–cellulose nanocomposite from a sustainable resource

Kebede Gamo Sebehanie, Surafel Shiferaw Legese, Alberto Velázquez del Rosario · Bulletin of Materials Science · 2023

Physical-chemical properties of nanocellulose synthesized from Miscanthus x Giganteus

M. M. Lazarenko, O. M. Alekseev, S. V. Kondratenko · Molecular Crystals and Liquid Crystals · 2023

Showing 20 of 55 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

30

Page views

0

PDF downloads

2

Outbound clicks

55

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.