Evaluating the Earth Subsurface for Civil Engineering Site Characterization in Agege, Southwest Nigeria Using Integrated Geoelectrical and Multichannel Analysis of Surface Wave (MASW)

Abstract

A geophysical investigation involving 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Imaging (2D ERI) and Multichannel Analysis of Surface Wave (MASW) has been carried out at Agege, Lagos, Nigeria with a view to delineating the subsurface stratigraphy and locate some competent strata/stratum for founding civil engineering structures. Six (6) 200 m long traverses were established within the study area. Along these traverses, 2D ERI were carried out adopting Wenner electrode configuration. Vertical Electrical Sounding (VES) adopting Schlumberger electrode array were carried out at selected points along profiles 1, 2 and 3 to determine the lithological sequence at depth. MASW data also were acquired along traverses 1, 2 and 3. The data were processed and the result yielded interpretable 2D resistivity structure and geoelectrical parameters (layer resistivity, thicknesses and depth) from the VES. The interpreted VES results were used to generate geoelectric section while the MASW resulted in 2D velocity sections. Three subsoils including topsoil, clay and clayey sand/sand were delineated beneath the study area. The resistivity and thickness range of the layers are; topsoil (34.0-54.6 ohm-m, 0.9 – 1.7 m), clay (10.3 – 17.7 ohm-m, 8.9 – 12.3 m) and clayey sand/sand (48.9 – 323 ohm-m) while the S-wave velocity range for the subsoil falls between 40 – 500 m/sec.