Nanomaterials Life Cycle Analysis: Health and Safety Practices, Standards and Regulations – Past, Present and Future Perspective

References (107)

1. 1 Toxicology of nanoparticles: A historical perspective [DOI]
2. 2 The ecotoxicology and chemistry of manufactured nanoparticles [DOI]
3. 3 Functionalization density dependence of single-walled carbon nanotubes cytotoxicity in vitro [DOI]
4. 4 Exposure to Carbon Nanotube Material: Aerosol Release During the Handling of Unrefined Single-Walled Carbon Nanotube Material [DOI]
5. 5 Characterization and modeling of mechanical behavior of polymer/clay nanocomposites [DOI]
6. 6 Polymer/montmorillonite nanocomposites with improved thermal properties [DOI]
7. 7 New polylactide-layered silicate nanocomposites. 2. Concurrent improvements of material properties, biodegradability and melt rheology [DOI]
8. 8 Ultrafine Particle Deposition in Humans During Rest and Exercise [DOI]
9. 9 Studying the potential release of carbon nanotubes throughout the application life cycle [DOI]
10. 10 Mechanical, thermal and flammability properties of polyethylene/clay nanocomposites [DOI]
11. 11 Decreasing Uncertainties in Assessing Environmental Exposure, Risk, and Ecological Implications of Nanomaterials [DOI]
12. 12 New Polylactide/Layered Silicate Nanocomposites, 6 [DOI]
13. 13 Monitoring Multiwalled Carbon Nanotube Exposure in Carbon Nanotube Research Facility [DOI]
14. 14 Fundamental aspects and recent progress on wear/scratch damage in polymer nanocomposites [DOI]
15. 15 The importance of life cycle concepts for the development of safe nanoproducts [DOI]
16. 16 Assessing exposure to airborne nanomaterials: Current abilities and future requirements [DOI]
17. 17 Effect of chemical structure on combustion and thermal behaviour of polyurethane elastomer layered silicate nanocomposites [DOI]
18. 18 Nanotechnologies, engineered nanomaterials and occupational health and safety – A review [DOI]
19. 19 Potential for Occupational Exposure to Engineered Carbon-Based Nanomaterials in Environmental Laboratory Studies [DOI]
20. 20 Elastic CNT–polyurethane nanocomposite: synthesis, performance and assessment of fragments released during use [DOI]
21. 21 Method for the characterization of the abrasion induced nanoparticle release into air from surface coatings [DOI]
22. 22 Identification and Characterization of Potential Sources of Worker Exposure to Carbon Nanofibers During Polymer Composite Laboratory Operations [DOI]
23. 23 Exposure assessment of workplaces manufacturing nanosized TiO2and silver [DOI]
24. 24 Characterization of Exposures To Nanoscale Particles and Fibers During Solid Core Drilling of Hybrid Carbon Nanotube Advanced Composites [DOI]
25. 25 Comparison of dust released from sanding conventional and nanoparticle-doped wall and wood coatings [DOI]
26. 26 Comparative cyto-genotoxicity assessment of functionalized and pristine multiwalled carbon nanotubes on human lung epithelial cells [DOI]
27. 27 Skin penetration and kinetics of pristine fullerenes (C60) topically exposed in industrial organic solvents [DOI]
28. 28 Evaluation of nanoparticle emission for TiO2 nanopowder coating materials [DOI]
29. 29 New Global Frontiers in Regulation: The Age of Nanotechnology
30. 30 Kinetics of the Thermal and Thermo‐Oxidative Degradation of a Polystyrene–Clay Nanocomposite [DOI]
31. 31 Reinforcement of polyurethane composites with an organically modified montmorillonite [DOI]
32. 32 Measurement of the Physical Properties of Aerosols in a Fullerene Factory for Inhalation Exposure Assessment [DOI]
33. 33 Characterization of exposure to silver nanoparticles in a manufacturing facility [DOI]
34. 34 Dustiness test of nanopowders using a standard rotating drum with a modified sampling train [DOI]
35. 35 Characterization of abrasion-induced nanoparticle release from paints into liquids and air [DOI]
36. 36 Investigation of airborne nanopowder agglomerate stability in an orifice under various differential pressure conditions [DOI]
37. 37 Synthesis of microbial elastomers based on soybean oily acids. Biocompatibility studies [DOI]
38. 38 Dustiness testing of engineered nanomaterials [DOI]
39. 39 A tale of opportunities, uncertainties, and risks [DOI]
40. 40 Environmental and Health Implications of Nanotechnology—Have Innovators Learned the Lessons from Past Experiences? [DOI]
41. 41 Soft Tissue Response to the Presence of Polypropylene‐G‐Poly(ethylene glycol) Comb‐Type Graft Copolymers Containing Gold Nanoparticles [DOI]
42. 42 Physical characteristics of nanoparticles emitted during drilling of silica based polyamide 6 nanocomposites [DOI]
43. 43 Experimental Determination of Ultrafine TiO 2 Deagglomeration in a Surrogate Pulmonary Surfactant: Preliminary Results [DOI]
44. 44 Size response of an SMPS–APS system to commercial multi-walled carbon nanotubes [DOI]
45. 45 Identification of starting points for exposure assessment in the post-use phase of nanomaterial-containing products [DOI]
46. 46 Effect of microstructure of nano- and micro-particle filled polymer composites on their tribo-mechanical performance [DOI]
47. 47 Nanoparticles monitoring in workplaces devoted to nanotechnologies [DOI]
48. 48 Nanotechnology Regulation: Developments in the United Kingdom [DOI]
49. 49 The social context of nanotechnology and regulating its uncertainty: A nanotechnologist approach [DOI]
50. 50 Workplace exposure at nanomaterial production processes [DOI]
51. 51 Nanotoxicology: An Emerging Discipline Evolving from Studies of Ultrafine Particles [DOI]
52. 52 Nanomaterials in the environment: Behavior, fate, bioavailability, and effects [DOI]
53. 53 Mechanical properties of nylon 6-clay hybrid [DOI]
54. 54 Occurrence, behavior and effects of nanoparticles in the environment [DOI]
55. 55 Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview [DOI]
56. 56 Safe handling of nanotechnology [DOI]
57. 57 Unusual inflammatory and fibrogenic pulmonary responses to single-walled carbon nanotubes in mice [DOI]
58. 58 Applications and implications of nanotechnologies for the food sector [DOI]
59. 59 Synthetic TiO2 nanoparticle emission from exterior facades into the aquatic environment [DOI]
60. 60 Potential scenarios for nanomaterial release and subsequent alteration in the environment [DOI]
61. 61 Cytotoxicity suppression and cellular uptake enhancement of surface modified magnetic nanoparticles [DOI]
62. 62 Airborne Nanostructured Particles and Occupational Health [DOI]
63. 63 Skin as a route of exposure and sensitization in chronic beryllium disease. [DOI]
64. 64 Ultrafine Particle Deposition and Clearance in the Healthy and Obstructed Lung [DOI]
65. 65 Polymeric Nanocomposites for Automotive Applications [DOI]
66. 66 Increased inflammation and altered macrophage chemotactic responses caused by two ultrafine particle types [DOI]
67. 67 Nanoparticles, human health hazard and regulation [DOI]
68. 68 Behavioural and biochemical responses of two marine invertebrates Scrobicularia plana and Hediste diversicolor to copper oxide nanoparticles [DOI]
69. 69 Exposure to nanoscale particles and fibers during machining of hybrid advanced composites containing carbon nanotubes [DOI]
70. 70 Nanoparticle Emission Assessment Technique (NEAT) for the Identification and Measurement of Potential Inhalation Exposure to Engineered Nanomaterials—Part B: Results from 12 Field Studies [DOI]
71. 71 Cleaner nanotechnology and hazard reduction of manufactured nanoparticles [DOI]
72. 72 On the Lifecycle of Nanocomposites: Comparing Released Fragments and their In‐Vivo Hazards from Three Release Mechanisms and Four Nanocomposites [DOI]
73. 73 The release of TiO2 and SiO2 nanoparticles from nanocomposites [DOI]
74. 74 Histological Study of Gender Differences in Accumulation of Silver Nanoparticles in Kidneys of Fischer 344 Rats [DOI]
75. 75 From workplace air measurement results toward estimates of exposure? Development of a strategy to assess exposure to manufactured nano-objects [DOI]
76. 76 Characterization of Nanoparticle Release from Surface Coatings by the Simulation of a Sanding Process [DOI]
77. 77 Airborne Monitoring to Distinguish Engineered Nanomaterials from Incidental Particles for Environmental Health and Safety [DOI]
78. 78 Characterization and Control of Airborne Particles Emitted During Production of Epoxy/Carbon Nanotube Nanocomposites [DOI]
79. 79 Characterization of Airborne Particles During Production of Carbonaceous Nanomaterials [DOI]
80. 80 Particle exposure levels during CVD growth and subsequent handling of vertically-aligned carbon nanotube films [DOI]
81. 81 Aerosol Monitoring during Carbon Nanofiber Production: Mobile Direct-Reading Sampling [DOI]
82. 82 Characterization and Evaluation of Nanoparticle Release during the Synthesis of Single-Walled and Multiwalled Carbon Nanotubes by Chemical Vapor Deposition [DOI]
83. 83 Number Size Distribution, Mass Concentration, and Particle Composition of PM1, PM2.5, and PM10in Bag Filling Areas of Carbon Black Production [DOI]
84. 84 The toxicity and oxidative stress of TiO2 nanoparticles in marine abalone (Haliotis diversicolor supertexta) [DOI]
85. 85 Risk Assessment of Engineered Nanomaterials: A Survey of Industrial Approaches [DOI]
86. 86 Particle Characteristics in the Reactor and Pelletizing Areas of Carbon Black Production [DOI]
87. 87 Fullerene–epoxy nanocomposites-enhanced mechanical properties at low nanofiller loading [DOI]
88. 88 Combined Single-Drop and Rotating Drum Dustiness Test of Fine to Nanosize Powders Using a Small Drum [DOI]
89. 89 How can nanobiotechnology oversight advance science and industry: examples from environmental, health, and safety studies of nanoparticles (nano-EHS) [DOI]
90. 90 Dielectric properties of polymer nanoparticle composites [DOI]
91. 91 Sanding dust from nanoparticle-containing paints: Physical characterisation [DOI]
92. 92 The efficacy of silver-embedded polypropylene-grafted polyethylene glycol-coated ventricular catheters on prevention of shunt catheter infection in rats [DOI]
93. 93 Assessing Potential Nanoparticle Release During Nanocomposite Shredding Using Direct-Reading Instruments [DOI]
94. 94 Dustiness behaviour of loose and compacted Bentonite and organoclay powders: What is the difference in exposure risk? [DOI]
95. 95 Particle Emission and Exposure during Nanoparticle Synthesis in Research Laboratories [DOI]
96. 96 Using a Modified Electrical Aerosol Detector To Predict Nanoparticle Exposures to Different Regions of the Respiratory Tract for Workers in a Carbon Black Manufacturing Industry [DOI]
97. 97 CONTROL OF AIRBORNE NANOPARTICLES RELEASE DURING COMPOUNDING OF POLYMER NANOCOMPOSITES [DOI]
98. 98 Polystyrene nanocomposites based on carbazole-containing surfactants [DOI]
99. 99 Ultrafine Aerosol Emission from the Free Fall of TiO2 and SiO2 Nanopowders [DOI]
100. 100 Measurement of nanoparticle removal by abrasion [DOI]
101. 101 Nanoparticle exposure at nanotechnology workplaces: A review [DOI]
102. 102 Release of Carbon Nanotubes from an Epoxy-Based Nanocomposite during an Abrasion Process [DOI]
103. 103 Exposure to Manufactured Nanostructured Particles in an Industrial Pilot Plant [DOI]
104. 104 Nanosafety in Europe 2015-2025: Towards Safe and Sustainable Nanomaterials and Nanotechnology Innovations [DOI]
105. 105 Airborne Nanoparticle Release Associated with the Compounding of Nanocomposites using Nanoalumina as Fillers [DOI]
106. 106 New evidence towards the release of airborne carbon nanotubes when burning nanocomposite polymers
107. 107 Concepts of Nanoparticle Dose Metric and Response Metric [DOI]

Cited by 12

Showing 6 of 12 known citations — external sources report more than can currently be individually listed.

Related research

• Design of Sustainable Copper-Based Hybrid Catalyst Using Aqueous Extract of Curcuma longa L. for One-Pot Synthesis of 1,2,3-Triazole — shares topic coverage
• Crystalline Copper Nanomaterials for Advanced Ceramic: A Comprehensive Review for Functional Ceramic Coating Approaches — shares topic coverage
• Determination of Optical Band Gap Energy of Wurtzite ZnO: Ce Nanocrystallites — shares topic coverage
• Preparation and Testing the Hyperthermia Property of Electrospun Micro and Nanofibers — shares topic coverage
• Nanomaterials for Sustainable Soil Remediation and Contaminant Immobilization — shares topic coverage