Skip to content
Research Article Open access CC BY 4.0

Removal of Heavy Metals Cd (II), Fe (III) and Ni (II), from Aqueous Solutions by Natural (Clinoptilolite) Zeolites and Application to Industrial Wastewater

Hoda Abd El-Azim, Fekry A. Mourad

Asian Journal of Environment & Ecology · pp. 1–13 · Published 12 Jun 2018

10.9734/AJEE/2018/41004

Abstract

The adsorption mechanism of Cd, Fe, and Ni, ions on natural (clinoptilolite) zeolites, a regional low-cost natural available adsorbent was studied in a batch adsorption system. The effect of several parameters such as contact time, zeolite dose, particle size, the effect of pH, and initial concentration of metal ions in the adsorption process was estimated. The optimum adsorption was found to occur at pH 6.0, adsorbent dose 1.0 g/L, and initial concentration 2, 20 and 10 mg/L for Cd, Fe, and Ni, respectively. The adsorption efficiency also increases with decreasing particle size of zeolites and the effect of retention time on adsorption ratio shows that 80% of the Cd, Fe, and Ni, are adsorbed by zeolite during first 120 minutes. Under these optimum conditions, the removal efficiency was 78.8, 89.1, and 65.5% of Cd+2, Fe+3 and Ni+2, ions, respectively. Sorption data have been interpreted in terms of Langmuir and Freundlich isotherms. The adsorption efficiency of heavy metals in industrial wastewater as application mode was also investigated using zeolites and these results showed that natural zeolites hold great potential to remove cationic heavy metal species from industrial wastewater and confirms the potential use of zeolite for the removal of heavy metals from industrial wastewater via adsorption. It was concluded that zeolite is very promising for the removal of metal ions from aqueous solution and hence we encourage the utilization of zeolites in environmental applications.  

Natural (clinoptilolite) zeolites adsorption heavy metals industrial wastewater

Cited by 35

A review on zeolites as cost-effective adsorbents for removal of heavy metals from aqueous environment

E. I. Ugwu, A. Othmani, C. Nnaji · International Journal of Environmental Science and Technology · 2021

Design of magnetic nanotechnological devices for the removal of fluoride from groundwater

V. Scheverin, A. Russo, M. F. Horst · Cleaner Engineering and Technology · 2021

Current technologies for recovery of metals from industrial wastes: An overview

Santhana Krishnan, Nor Syahidah Zulkapli, Hesam Kamyab · 2021

Influence of leachate percolation on two bentonitic mixtures

S. Durukan, Ender Başarı · Arabian Journal of Geosciences · 2021

A batch study of Ni(II) sorption on natural Slovak zeolite

Z. Kováčová, C. Pla · IOP Conference Series: Materials Science and Engineering · 2020

Metal Removal from Nickel-Containing Effluents Using Mineral–Organic Hybrid Adsorbent

I. Zinicovscaia, N. Yushin, D. Grozdov · Materials · 2020

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

35

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.