Skip to content
Research Article Open access CC BY 4.0

Influence of Annealing Temperature on the Physical Properties of Cu2SnSe3 Thin Films Prepared by Thermal Vacuum Evaporation Technique

Mohd Amirul Syafiq Mohd Yunos, Zainal Abidin Talib, Wan Mahmood Mat Yunus

Physical Science International Journal · pp. 1–10 · Published 14 Oct 2016

10.9734/PSIJ/2016/29024

Abstract

Ternary compound of semiconductor polycrystals Copper Tin Selenide, Cu2SnSe3, thin films have been prepared by vacuum thermal evaporation technique on well-cleaned glass substrate and annealed in purified nitrogen atmosphere from room temperature to 500°C for different annealing temperature. The annealing effects on surface morphologies, elemental compositions, and electrical behaviour of these films have been investigated using Scanning Electron Microscope (SEM), Energy Dispersive X-Ray (EDX), and Van der Pauw techniques. EDX studies showed that increasing the annealing temperature resulted in drastic loss of Cu content. It is observed that elemental compositions of the Cu2SnSe3 thin films were close to the ideal stoichiometric value 2:1:3. The annealed Cu2SnSe3 thin films were found to be p-type semiconductor with activation energy, ΔEa, of 0.018 eV obtained from I-V characteristic analysis.

Cu2SnSe3 thin film annealing temperature vacuum evaporation physical properties

Cited by 1

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

1

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.