Skip to content
Research Article Open access CC BY 4.0

Optimization of the Performance of Hybrid Solar Biomass Dryer for Drying Maize Using ANSYS Workbench

Jackis Aukah, Mutuku Muvengei, Hiram Ndiritu, Calvin Onyango

Journal of Energy Research and Reviews · pp. 50–69 · Published 3 Feb 2020

10.9734/jenrr/2020/v4i130119

Abstract

In this paper ANSYS workbench was used to optimize the performance of hybrid solar biomass dryer for drying shelled maize in order to find the optimal operating input variables when the air temperature within the drying chamber set within the permissible range at reasonably high flow velocity. Hybrid Solar dryer with biomass as a source of fuel for auxiliary heating during absence or low solar insolation is a feasible option for small scale maize farmers [1]. At times high temperatures are induced in this dryer which may result in grain fissures and breakage during milling, thus reducing the grain quality. Optimization results indicate that in order to keep the air temperature within drying chamber to permissible range [2], the air velocity at collector inlet and biomass heat exchanger outlet should be improved to 3 m/s and 2.8 m/s respectively while the capacity of the biomass heat exchanger should also be enhanced to provide hot air at 85°C. It be concluded from the study that HSBD is suitable for drying maize as well as other agricultural products since continuous interrupted drying can be achieved. The capability of the dryer to maintain uniform temperature and air flow within the drying chamber enable high quality dried products within a short duration.

Optimization shelled maize hybrid solar biomass dryer ANSYS design exploration simulation.

Cited by 10

Performance evaluation, simulation, and mathematical modeling of biomass–solar drying systems: a systematic review

F. Rashid, K. Hammoodi, Najah M. L. Al Maimuri · Journal of Thermal Analysis and Calorimetry · 2026

A review of optimization strategies for solar-biomass dryers

Chukwuemeka Anyaoha, Florence C. Okoroigwe, Chinyere N. Okoroigwe · Sustainable Energy Technologies and Assessments · 2025

Thermal Optimalization with CFD Analysis and Real-Time Performance Identification in Briquette Ovens Using Modbus-Based Communication

Nurul Hiron, N. Busaeri, F. M. Nursuwars · Journal of Advanced Research in Numerical Heat Transfer · 2024

OPTIMIZATION DESIGN ANALYSIS OF MOVABLE ROTATING PLATE TYPE GRADING DEVICE FOR POTATO

Haohao Zhao, Weigang Deng, Zhiqi Ren · INMATEH Agricultural Engineering · 2024

Optimization of Biomass fuel Cold Briquetting Parameters based on Response Surface Analysis

Zhi-Gang Li, H. Zou · Journal of the Institution of Engineers (India) Series C · 2021

Recent advances in solar drying system: A Review

A. A. Razak, M. Tarminzi, M. Azmi · International Journal of Engineering Technology and Sciences · 2021

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

10

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.