Skip to content
Research Article Open access CC BY 4.0

Efficient Open Isobaric Expansion Based Thermal Cycles at Low Temperatures

Ramon Ferreiro Garcia, Beatriz Ferreiro Sanz, Cristina Ferreiro Sanz

Current Journal of Applied Science and Technology · pp. 14–30 · Published 9 Jan 2015

10.9734/BJAST/2015/13696

Abstract

The work aims to provide feasible structures for the open processes based thermal cycle as well as the regenerative open processes based thermal cycle characterised by rendering high thermal efficiency at low temperatures. Both cycles differ from the conventional Carnot-based thermal cycles (Carnot, Otto, Diesel, Rankine, Brayton, Stirling, Ericsson, and variants of these cycles) in that the conversion of heat to mechanical work is performed undergoing load reaction based path functions which means an isobaric expansion process at constant load in which thermal energy absorption and conversion to mechanical work are performed simultaneously along a single transformation of the cycle, contrary to what happens in conventional Carnot-based engines, in which mechanical work is delivered by means of a quasi-entropic expansion along a single transformation. Because of the mentioned differences these cycles do not obey the Carnot statement. A performance analysis of the OPTC and the ROPTC operating with hydrogen, helium, and nitrogen was carried out and the results were compared with those for a Carnot cycle operating under the same range of temperatures. High theoretical thermal efficiency was achieved for the ROPTC, surpassing the Carnot factor under favourable conditions. These results, obtained with a structurally simple and compact engine, pave the way for a new generation of power convertors.

Carnot factor isobaric expansion open process regeneration thermal efficiency.

References (18)

  1. 1 Low-grade heat conversion into power using organic Rankine cycles – A review of various applications [DOI]
  2. 2 Reference Fluid Thermodynamic and Transport Properties (REFPROP)
  3. 3 A review of organic rankine cycles (ORCs) for the recovery of low-grade waste heat [DOI]
  4. 4 Design and testing of the Organic Rankine Cycle [DOI]
  5. 5 An examination of regenerative organic Rankine cycles using dry fluids [DOI]
  6. 6 Review of organic Rankine cycles for internal combustion engine exhaust waste heat recovery [DOI]
  7. 7 Alternative ORC bottoming cycles FOR combined cycle power plants [DOI]
  8. 8 Bottoming micro-Rankine cycles for micro-gas turbines [DOI]
  9. 9 Fluid selection and parametric optimization of organic Rankine cycle using low temperature waste heat [DOI]
  10. 10 Efficiency and optimal performance evaluation of organic Rankine cycle for low grade waste heat power generation [DOI]
  11. 11 Comparative analysis of natural and synthetic refrigerants in application to low temperature Clausius–Rankine cycle [DOI]
  12. 12 An open steam power cycle used for IC engine exhaust gas energy recovery [DOI]
  13. 13 Efficient use of energy by utilizing gas turbine combined systems [DOI]
  14. 14 Thermodynamic analysis of a novel energy-efficient refrigeration system subcooled by liquid desiccant dehumidification and evaporation [DOI]
  15. 15 Thermodynamic performance assessment of an ammonia–water Rankine cycle for power and heat production [DOI]
  16. 16 Theory and method for analysis of low temperature driven power cycles [DOI]
  17. 17 Preliminary Study of an Efficient OTEC Using a Thermal Cycle with Closed Thermodynamic Transformations [DOI]
  18. 18 Contributions on Closed System Transformations Based Thermal Cycles [DOI]

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

68

Page views

0

PDF downloads

19

Outbound clicks

0

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.