Skip to content
Research Article Open access CC BY 4.0

Effect of Pyrolysis Temperature and Residence Time on Bio-char Obtained from Pyrolysis of Shredded Cotton Stalk

J. M. Makavana, P. N. Sarsavadia, P. M. Chauhan

International Research Journal of Pure and Applied Chemistry · pp. 10–28 · Published 22 Aug 2020

10.9734/irjpac/2020/v21i1330236

Abstract

Bio-char is carbon-rich product generated from biomass through batch type slow pyrolysis. In this study, the effects of pyrolysis temperature and residence time on the yield and properties of bio-chars obtained from shredded cotton stalks were investigated. Safely said that the quality of bio-char of shredded cotton stalk obtained at 500°C temperature and 240 min is best out of the all experimental levels of variables of temperature and residence time. At this temperature and residence time, the quality of bio-char in terms higher heating value (8101.3cal /g or 33.89 MJ/kg), nitrogen (1.56%), Carbon (79.30%), and C/N ratio (50.83) respectively. The quality of bio-char for various applications is discussed along with different quality parameters. The bio-char could be used for the production of activated carbon, in fuel applications, and water purification processes. Average bulk density of whole cotton stalk and shredded cotton stalk was found as 29.90 kg/m3 and 147.02 kg/m3 respectively. Thus density was increased by 3.91 times. The value of pH, EC and CEC of shredded cotton stalk biomass was found as 5.59, 0.03 dS/m and 38.84 cmol/kg respectively. Minimum and maximum values pH, EC and CEC of its bio-char was found as 5.85 to9.86, 0.04 to 0.10 dS/m and 38.02 to 24.39 cmol/kg at 200°C and 60 min and; 500°C and 240 min temperature and residence time respectively. Moisture content, ash content, volatile matter and fixed carbon of shredded cotton stalk biomass were found as, 12.5, 5.27, 80.22, and 14.51 (%, d.b) respectively. The minimum and maximum value of bio-char in terms of ash content, volatile matter and fixed carbon of bio-char were found as 5.5 to 15.56, 48.02 to 79.48 and 15.02 to 36.40 (%, d.b) respectively. Calorific value of cotton stalk biomass was found as 3685.3 cal /g. The minimum and maximum higher heating value of its bio-char was found as 4622.0 cal/ g and 8101.3 cal/g at 200°C and 60 min and; 500˚C and 240 min temperature and residence time.

Bio-char pyrolysis residence time temperature properties

References (17)

  1. 1 Effects of temperature and particle size on bio-char yield from pyrolysis of agricultural residues [DOI]
  2. 2 Influence of pyrolysis temperature on production and nutrient properties of wastewater sludge biochar [DOI]
  3. 3 CHARACTERIZATION OF DESIGNER BIOCHAR PRODUCED AT DIFFERENT TEMPERATURES AND THEIR EFFECTS ON A LOAMY SAND
  4. 4 Physical and chemical characterization of biochars derived from different agricultural residues [DOI]
  5. 5 Biochar derived from anaerobically digested sugar beet tailings: Characterization and phosphate removal potential [DOI]
  6. 6 Chemical and structural properties of carbonaceous products obtained by pyrolysis and hydrothermal carbonisation of corn stover [DOI]
  7. 7 Influence of pyrolysis temperature and heating rate on the production of bio-oil and char from safflower seed by pyrolysis, using a well-swept fixed-bed reactor [DOI]
  8. 8 Influence of temperature on biomass pyrolysis in a conical spouted bed reactor [DOI]
  9. 9 Combustion reactivity and morphological change in coal chars: Effect of pyrolysis temperature, heating rate and pressure [DOI]
  10. 10 Carbonisation of bagasse in a fixed bed reactor: influence of process variables on char yield and characteristics [DOI]
  11. 11 Characterization of products from the pyrolysis of rapeseed oil cake [DOI]
  12. 12 Potential evolution of Turkish agricultural residues as bio-gas, bio-char and bio-oil sources [DOI]
  13. 13 Feasibility study of Jatropha seed husk as an open core gasifier feedstock [DOI]
  14. 14 Engineering Properties of Various Agricultural Residue [DOI]
  15. 15 Characterization of Biochar Properties Affected by Different Pyrolysis Temperatures Using Visible-Near-Infrared Spectroscopy [DOI]
  16. 16 Volatilisation and Catalytic Effects of AAEM Species on Reactivity of Char from Pyrolysis and Gasification of Victorian Brown Coal
  17. 17 A Review of Sustainable Technologies for Bio char Production from Biomass any Waste Material

Cited by 44

Comparative assessment of biochar reactor technologies for biomass conversion: Design, performance, and application suitability

Dipita Ghosh, Nathaniel Anderson, Han-Sup Han · Journal of Cleaner Production · 2026

Microplastics in facial cleanser: extraction, identification, potential toxicity, and continuous-flow removal using agricultural waste–based biochar

Muhammad Adli Hanif, Naimah Ibrahim, Farrah Aini Dahalan · Environmental Science and Pollution Research · 2023

An interdisciplinary overview on biochar production engineering and its agronomic applications

Faith Mawia Muema, Yohan Richardson, Amadou Keita · Biomass and Bioenergy · 2024

Sustainable valorization of macroalgae residual biomass, optimization of pyrolysis parameters and life cycle assessment

Shahrukh Nawaj Alam, Bhaskar Singh, Abhishek Guldhe · Science of The Total Environment · 2024

Showing 15 of 44 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

28

Page views

0

PDF downloads

2

Outbound clicks

44

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.