Skip to content
Research Article Open access CC BY 3.0

Effect of Nano-Clay on Alkali Activated Water-Cooled Slag Geopolymer

H. M. Khater, B. A. El-Sabbagh, M. Fanny, M. Ezzat, M. Lottfy, A. M. El Nagar

Current Journal of Applied Science and Technology · pp. 764–776 · Published 7 May 2013

10.9734/BJAST/2013/2690

Abstract

Ground granulated blast furnace slag is a finely ground, rapidly chilled aluminosilicate melt material that is separated from molten iron in the blast furnace as a by-product. Rapid cooling results in an amorphous or a glassy phase known as GGBFS or water-cooled slag (WCS). Alkaline activation of latent hydraulic WCS by 6% sodium hydroxide was studied. Nano clay is an ultrafine material that produced from firing kaolin material up to 800ºC for 2hrs with a heating rate of 5ºC/min; this can modify mechanical, microstructural and thermal properties of geopolymer products and added to the geopolymer mix in the ratio of 0 up to 7% of the dry weight. Curing was performed under 100% relative humidity and at a temperature of 38ºC. Gelenium Ace super-plasticizer was added in the ratio of 4% from the dry weight to ensure good dispersing of the used nano clay. Results showed that increasing the percentage of nano clay up to 1% results in an enhancement in the mechanical properties as compared with control mix up to 90 days, while higher ratio leads to matrix dilution and so negatively affect mechanical characteristics of the resulting products. The study of thermal properties is taken place for the different ratios by experimental and mathematical evaluation. Study shown that the thermal properties as well as thermal insulation properties improved with the increased ratio of nano clay in ratio 1-1.5%.

Nano-clay geopolymer slag microstructure thermal properties

References (23)

  1. 1 Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement [DOI]
  2. 2 An environmental evaluation of geopolymer based concrete production: reviewing current research trends [DOI]
  3. 3 Microstructure of cement mortar with nano-particles [DOI]
  4. 4 Hydration products of alkali activated slag cement [DOI]
  5. 5 A review on emission analysis in cement industries [DOI]
  6. 6 Emerging energy-efficiency and CO2 emission-reduction technologies for cement and concrete production: A technical review [DOI]
  7. 7 A study on mechanical and pressure-sensitive properties of cement mortar with nanophase materials [DOI]
  8. 8 Greening of the Concrete Industry for Sustainable Development
  9. 9 Effect of the particle size on the micro and nanostructural features of a calcium phosphate cement: a kinetic analysis [DOI]
  10. 10 Introduction: Sustainable Development and Concrete Technology
  11. 11 Global warming impact on the cement and aggregates industries
  12. 12 Nanotechnology in Construction 3 [DOI]
  13. 13 Effects of organo-modified montmorillonite on strengths and permeability of cement mortars [DOI]
  14. 14 Solid solution between Al-ettringite and Fe-ettringite (Ca6[Al1−Fe (OH)6]2(SO4)3·26H2O) [DOI]
  15. 15 How nanotechnology can change the concrete world : Part two of a two-part series
  16. 16 Effect of Nano-sized Titanium Dioxide on Early Age Hydration of Portland Cement [DOI]
  17. 17 New aqueous magnetic fluids [DOI]
  18. 18 Nanotechnology and Cementitious Materials [DOI]
  19. 19 Complex susceptibility analysis of magneto-fluids: Optical band gap and surface studies on the nanomagnetite-based particles [DOI]
  20. 20 The technology of cement and concrete
  21. 21 Hydration Behaviour of Ecocement in Presence of Metakaolin [DOI]
  22. 22 CALCIUM EFFECT ON GEOPOLYMERIZATION OF ALUMINO SILICATE WASTES
  23. 23 SP-254: Nanotechnology of Concrete: Recent Developments and Future Perspectives [DOI]

Cited by 100

Effect of nano-silica on the efflorescence of waste based alkali-activated inorganic binder

Jinbang Wang, Tongtong Zhou, Dongyu Xu · Construction and Building Materials · 2018

Interaction of micro/nano-metric size of Jordanian aluminosilicate raw materials with high pH solution

Islam Aldabsheh, Maite Garcia-Valles, Salvador Martinez · Materials Letters · 2018

Development of Solid and Hollow Geopolymer Masonry Blocks

K Venugopal, Radhakrishna · GSTF Journal of Engineering Technology · 2016

Nanomaterials Applied in Modifications of Geopolymer Composites: a Review

Tianyu Xie, Chengfeng Fang · Australian Journal of Civil Engineering · 2019

The Combined effect of wood ash and nanosilica on the mechanical properties of blended mortar

Abiodun Akinwale, Hussein Walied, Akeem Ayinde Raheem · Results in Engineering · 2025

Nano-malzemelerin geopolimer betonun termal davranışlarına etkisi

Necip Altay EREN · Uluslararası Teknolojik Bilimler Dergisi · 2023

Showing 20 of 100 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

70

Page views

0

PDF downloads

22

Outbound clicks

100

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.