Effect of Nano-Clay on Alkali Activated Water-Cooled Slag Geopolymer
H. M. Khater, B. A. El-Sabbagh, M. Fanny, M. Ezzat, M. Lottfy, A. M. El Nagar
Current Journal of Applied Science and Technology · pp. 764–776 · Published 7 May 2013
10.9734/BJAST/2013/2690Abstract
Ground granulated blast furnace slag is a finely ground, rapidly chilled aluminosilicate melt material that is separated from molten iron in the blast furnace as a by-product. Rapid cooling results in an amorphous or a glassy phase known as GGBFS or water-cooled slag (WCS). Alkaline activation of latent hydraulic WCS by 6% sodium hydroxide was studied. Nano clay is an ultrafine material that produced from firing kaolin material up to 800ºC for 2hrs with a heating rate of 5ºC/min; this can modify mechanical, microstructural and thermal properties of geopolymer products and added to the geopolymer mix in the ratio of 0 up to 7% of the dry weight. Curing was performed under 100% relative humidity and at a temperature of 38ºC. Gelenium Ace super-plasticizer was added in the ratio of 4% from the dry weight to ensure good dispersing of the used nano clay. Results showed that increasing the percentage of nano clay up to 1% results in an enhancement in the mechanical properties as compared with control mix up to 90 days, while higher ratio leads to matrix dilution and so negatively affect mechanical characteristics of the resulting products. The study of thermal properties is taken place for the different ratios by experimental and mathematical evaluation. Study shown that the thermal properties as well as thermal insulation properties improved with the increased ratio of nano clay in ratio 1-1.5%.
Cited by 20
Jinbang Wang, Tongtong Zhou, Dongyu Xu · Construction and Building Materials · 2018
Islam Aldabsheh, Maite Garcia-Valles, Salvador Martinez · Materials Letters · 2018
W. Sekkal, A. Zaoui · Structural Concrete · 2024
Abdeen M. El Nagar, Mahmoud Salem, Amany F. Hasaballah · HBRC Journal · 2023
K Venugopal, Radhakrishna · GSTF Journal of Engineering Technology · 2016
Mehdi Chougan, Seyed Hamidreza Ghaffar, Pawel Sikora · Materials & Design · 2021
Tianyu Xie, Chengfeng Fang · Australian Journal of Civil Engineering · 2019
Abiodun Akinwale, Hussein Walied, Akeem Ayinde Raheem · Results in Engineering · 2025
Necip Altay EREN · Uluslararası Teknolojik Bilimler Dergisi · 2023
Xinyue Xi, Yuanxun Zheng, Jingbo Zhuo · Journal of Building Engineering · 2024
Related research
- Stimuli-Sensitive Pyrenylated Hydrogels as Optical Sensing Platform for Multiple Metal Ions — shares topic coverage
- Pack-cyaniding: A Comparative Study of Low and High-Temperature Treatment — shares topic coverage
- Characterization of Mild Steel Case-hardened in Processed Cassava Leaves — shares topic coverage
- Influence of Foundry Sand and Natural Pozzolans on the Mechanical, Durability and Micro-structural Properties of Lightweight Concrete — shares topic coverage
- Resistance to Thaumasite form of Sulphate Attack of Blended Cement Mortars — shares topic coverage
Article metrics
Real usage data collected on this platform.
0
Page views
0
PDF downloads
0
Outbound clicks
20
Citations
Views by country
Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".
No views recorded yet.
Traffic sources
Referring site, by host.
No traffic recorded yet.
Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.