Skip to content
Research Article Open access CC BY 4.0

Development of a Snake Gourd Seed Decorticating Machine

D. O. Idowu, O. K. Owolarafe

Journal of Engineering Research and Reports · pp. 177–192 · Published 25 Sep 2021

10.9734/jerr/2021/v20i1217432

Abstract

Aims: A snake gourd seeds sheller which comprises of hopper, decorticating chamber, and the cleaning chamber was designed, fabricated and evaluated in this study. Methodology: A 3-level factorial response surface methodology (RSM) of design expert version 6.0.8 of 2002 was used to identify the relationship between the response functions and the process variables of the device. The factors considered are shaft speed (300, 350, 400 rpm), soaking time (8, 15, and 20 minutes.), hammer diameter (115, 135 and 150 mm) and feed rate (90, 120, 150 kg/hr.) in the determination of shelling efficiency while air speed (2, 4, and 6 m/s) and angle of air injection (20, 40, 600) were used in the determination of cleaning efficiency.  Results: The shelling efficiency was observed to increase with increase in hammer speed, hammer diameter and soaking time but decreased with increase in machine feed rate. The maximum shelling efficiency of 97.61% was recorded when the soaking time is 20 minutes, hammer speed is 400 rpm, hammer diameter is 150 mm and feeding rate is 90 kg/hr. The cleaning efficiency increases with increase in air speed and angle of air injection. The cleaning efficiency of the machine was found to be 92.5 % when the angle of injection and air speed is 600 and 5.0 m/s respectively. The effect of the speed and the angle of injection was found to be significant (p<0.05). Conclusion: The study concluded that with the result of the performance evaluation of the machine, it is suitable for inclusion in the process line for the seed and hence its potential could be harnessed.

Snake gourd Sheller, shelling efficiency cleaning efficiency Hammer speed Angle of injection

References (8)

  1. 1 Storage and Flow of Solids
  2. 2 Design, development and testing of hand-operated decorticator for Jatropha fruit [DOI]
  3. 3 Optimizing the Performance of a Manually Operated Groundnut (Arachis hypogaea) Decorticator [DOI]
  4. 4 Variation in Lipid Composition of the Seed Oil Parinari polyandra Benth. [DOI]
  5. 5 MODIFICATION AND EVALUATION OF A RECIPROCATING MACHINE FOR SHELLING PEANUT
  6. 6 COMBINE TAILINGS RETURNS, PART I: THE EFFECTS OF COMBINE PERFORMANCE AND SETTINGS ON TAILINGS [DOI]
  7. 7 Development and testing of a portable hand operated groundnut sheller
  8. 8 A study on the effect of washing kernel on yield, colour and a rheological property of snake gourd oil.

Cited by 4

Design and Development of a Cowpea Decorticator

O. R. Oyetunji, D. O. Idowu, T. B. Adebayo · Journal of Engineering Research and Reports · 2023

A Review of Decorticators for Various Industrial Crops: Design, Working Principle, and Parameters Affecting the Efficiency

Department of Food Process Engineering, National Institute of Technology, Rourkela (Odisha), India., Dr. Tarak Chandra Panda, Dr. Mahipal Singh Tomar · Indian Journal of Agriculture Engineering · 2025

Showing 2 of 4 known citations — external sources report more than can currently be individually listed.

Related research

Article metrics

Real usage data collected on this platform.

5

Page views

0

PDF downloads

0

Outbound clicks

4

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.