Skip to content
Research Article Open access CC BY 4.0

Optimum Process Parameters and Thermal Properties of Moisture Content Reduction in Water Yam Drying

C. Ezedinma Henry, T. Nwabanne Jospeh, E. Onu Chijioke, O. Nwajinka Charles

Asian Journal of Chemical Sciences · pp. 44–54 · Published 30 Apr 2021

10.9734/ajocs/2021/v9i419080

Abstract

The determination of optimum process parameters for moisture content reduction in water yam drying using a hot air dryer was the aim of this work. Gravimetric method was used to determine the moisture content. Design of experiment was used with slice thickness, airspeed and temperature as the independent factors. Thermal properties such as effective moisture diffusivity and activation energy were determined. The result showed that slice thickness, airspeed and temperature have significant influence on the moisture content reduction. The effective moisture diffusivity ranged from 2.84 x 10-5 m2/s to 8.10 x 10-5 m2/s. The activation energy was 30.592kJ/mol. Minimum moisture content value of 11.98% was obtained at slice thickness of 2mm, airspeed of 2 m/s and temperature of 70oC. The quadratic model best described the drying process. The hot air dryer can conveniently be used for moisture content reduction in water yam slices which will increase its shelf life.

Water yam drying optimization effective moisture diffusivity thermal properties

Cited by 0

No indexed citations yet.

Article metrics

Real usage data collected on this platform.

0

Page views

0

PDF downloads

0

Outbound clicks

0

Citations

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

No views recorded yet.

Traffic sources

Referring site, by host.

No traffic recorded yet.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.