Skip to content
Research Article Open access CC BY 4.0

Thermal Study of Tunisian Phosphogypsum for Use in Reinforced Plaster

Nabawia Mechi, Mohamed Ammar, Mouna Loungou, Elimame Elaloui

Current Journal of Applied Science and Technology · pp. 1–10 · Published 23 May 2016

10.9734/BJAST/2016/25728

Abstract

This work presents a promising way to investigate the valorization of natural residual from Tunisian industrial wastes. In fact, large quantities of phosphogypsum which are obtained from Tunisian Chemical Group "TCG" are accumulated every year in Tunisia. The rational valorization of these available renewable resources fits very well with the recent sustainable approach, established nowadays. This work aims at ascertaining the chemical composition of this inorganic residue and structural characterization for use as a reinforced plaster. Several thermal treatments from 100°C to 800°C were established to prepare from phosphogypsum various qualities of this material to be characterized by numerous techniques such as the FTIR, XRD, SEM, DSC, DTG and TGA in order to apply in potential application. Calcination temperature that gave the best value for the beginning and the end of setting was 200°C. The experimental tests showed height values of flexural strength for thecalcined PG at 200°C (0.45 MPa).

Phosphogypsum thermal treatments thermo gravimetric analysis setting time

References (19)

  1. 1 Construction and Building Materials
  2. 2 International journal of mineral processing [DOI]
  3. 3 Utilization of waste phosphogypsum to prepare non-fired bricks by a novel Hydration–Recrystallization process [DOI]
  4. 4 Treatment of phosphogypsum waste produced from phosphate ore processing [DOI]
  5. 5 Role of phosphogypsum impurities on strength and microstructure of selenite plaster [DOI]
  6. 6 Use of fly ash, phosphogypsum and red mud as a liner material for the disposal of hazardous zinc leach residue waste [DOI]
  7. 7 Utilization of phosphogypsum for the preparation of non-autoclaved aerated concrete [DOI]
  8. 8 Solubility study and valorization of phosphogypsum salt solution [DOI]
  9. 9 Treatment of phosphogypsum waste using suitable organic extractants [DOI]
  10. 10 Distribution of rare earth elements in marine sediments from the Strait of Sicily (western Mediterranean Sea): Evidence of phosphogypsum waste contamination [DOI]
  11. 11 Thermodynamic study of phosphogypsum decomposition by sulfur [DOI]
  12. 12 Phosphogypsum Transition to α‐Calcium Sulfate Hemihydrate in the Presence of Omongwaite in NaCl Solutions Under Atmospheric Pressure [DOI]
  13. 13 Investigation of the radiological impact on the coastal environment surrounding a fertilizer plant [DOI]
  14. 14 Mobility of selected trace elements in Mediterranean red soil amended with phosphogypsum: experimental study [DOI]
  15. 15 The use of phosphogypsum in Syrian cement industry: Radiation dose to public [DOI]
  16. 16 Phosphogypsum surface characterisation using scanning electron microscopy [DOI]
  17. 17 Feasibility analysis for decomposition of phosphogypsum in cement precalciner [DOI]
  18. 18 Cluster Analysis Based of Geochemical Properties of Phosphogypsum Dump Located Near Bacau City in Romania [DOI]
  19. 19 Investigation of the Possibility of Copper Removal from Industrial Leachate by Raw and Calcined Phosphogypsum: D‐Optimal and Taguchi Designs [DOI]

Cited by 21

INDUSTRIAL REJECTION: REMOVAL OF HEAVY METALS BASED ON CHEMICAL PRECIPITATION AND RESEARCH FOR RECOVERABLE MATERIAL IN BYPRODUCTS

Jemjami Saloua, Taoufik Mohamed, Moufti Ahmed · International Journal of Engineering Technologies and Management Research · 2020

Utilization of Industrial Waste Phosphogypsum as Geomaterial: A Review

Yatesh Thakur, Akanksha Tyagi, Sudipta Sarkar · Journal of Hazardous, Toxic, and Radioactive Waste · 2023

Effective and innovative procedures to use phosphogypsum waste in different application domains: review of the environmental, economic challenges and life cycle assessment

Brahim Bouargane, Khaoula Laaboubi, Mohamed Ghali Biyoune · Journal of Material Cycles and Waste Management · 2023

Experimental study on light weight panel using phosphogypsum

P. Muthukumar, Manisha Shewale, Shraddha Asalkar · Materials Today: Proceedings · 2022

Adsorptive treatment of phosphogypsum leachate by carbonaceous materials: a comparative study on performance evaluation

C. Avşar, E. Çelik, K. D. Yagcioglu · International Journal of Environmental Science and Technology · 2025

Studying the Effect of Phosphogypsum Addition on Ceramic Membrane Properties

Adel Zrelli, Elhem Metoui, Abdoulaye Doucouré · Engineering and Technology Journal · 2023

Effects of inorganic constituents on thermal and mechanical properties in several types of phosphogypsum: a case study of Gafsa-site (TN)

M. Krichen, Abderraouf Jraba, Hatem Ksibi · Euro-Mediterranean Journal for Environmental Integration · 2023

Showing 10 of 21 known citations — external sources report more than can currently be individually listed.

Article metrics

Real usage data collected on this platform.

62

Page views

0

PDF downloads

30

Outbound clicks

21

Citations

Views over time

Views by country

Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".

Traffic sources

Referring site, by host.

Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.