Hybrid Panels of Wood Plies and Particles Pinus sp
Laurenn Borges de Macedo, Giovana Gobatto Balanco, Lucas José Marini, Tulio Hallak Panzera, André Luiz Christoforo, Francisco Antonio Rocco Lahr
Current Journal of Applied Science and Technology · pp. 1–9 · Published 2 Dec 2017
10.9734/CJAST/2017/36951Abstract
The aim of this study was to develop a hybrid panel produced with wood plies and wood particles of Pinus sp. as an alternative to plywood. Tests were performed to determine mechanical properties in static bending: elasticity modulus and rupture modulus, in addition to physical testing to determine thickness swelling after 24 hours water submersion. These properties were compared with normative documents of plywood (DIN 68792) and OSB (EN 300: 2006). It was possible to conclude that panels produced in this study are in accordance with the minimum requirements of two Normative codes related to evaluated properties, which proves technical feasibility of its production.
References (5)
- 1 PHYSICO-MECHANICAL CHARACTERIZATION OF THE Anadenanthera colubrine WOOD SPECIE [DOI]
- 2 Full Characterization of Vatairea sp Wood Specie [DOI]
- 3 Physical Properties of OSB Panels Manufactured with CCA and CCB Treated Schizolobium amazonicum and Bonded with Castor Oil Based Polyurethane Resin [DOI]
- 4 Thermal Insulation Particleboards Made with Wastes from Wood and Tire Rubber [DOI]
- 5 European Committee for Standardization [DOI]
Cited by 2
Andréa de Souza Almeida, Tamiris Luiza Soares Lanini, Juliana Argente Caetano, André Luis Christoforo, Francisco Antonio Rocco Lahr · Current Journal of Applied Science and Technology · 2018
Showing 1 of 2 known citations — external sources report more than can currently be individually listed.
Related research
- Copperized Karanj Seed (Pongamia pinnata) Oil as an Alternative to Chemical Preservative in Plywood Manufacturing — shares topic coverage
- Numerical Study of the Performance of a Double-Insulated Barbecue Oven: Implication for Energy Savings and Thermal Comfort — shares topic coverage
- Design and Development of a Petrol-Powered Hammer Mill Machine — shares topic coverage
- Development of a Low-Cost Hammer Mill Machine for Food Processing — shares topic coverage
- Particle Origins for String Vibrations — shares topic coverage
Article metrics
Real usage data collected on this platform.
89
Page views
0
PDF downloads
36
Outbound clicks
2
Citations
Views over time
Views by country
Approximate, from request IP at view time — not citizenship or institution. Countries with fewer than 5 views are grouped as "Other".
Traffic sources
Referring site, by host.
Views and downloads exclude known bots/crawlers. Citations combines this platform's own DOI-resolved index with each external source's own reported total — see Cited by above for individually listed citing works. Last refreshed 0 seconds ago.